[ 0.000000] Linux version 5.3.7-301.fc31.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Mon Oct 21 19:18:58 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/images/pxeboot/vmlinuz root=live:CDLABEL=FEDORA-WS-L rd.live.image quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005b880fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005b881000-0x000000005b9a3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005b9a4000-0x000000005bb30fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005bb31000-0x000000005bf71fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005bf72000-0x000000005cb8efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005cb8f000-0x000000005effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x5776c018-0x5777e857] usable ==> usable [ 0.000000] e820: update [mem 0x5776c018-0x5777e857] usable ==> usable [ 0.000000] e820: update [mem 0x57759018-0x5776b857] usable ==> usable [ 0.000000] e820: update [mem 0x57759018-0x5776b857] usable ==> usable [ 0.000000] e820: update [mem 0x5774a018-0x57758057] usable ==> usable [ 0.000000] e820: update [mem 0x5774a018-0x57758057] usable ==> usable [ 0.000000] e820: update [mem 0x5773c018-0x57749457] usable ==> usable [ 0.000000] e820: update [mem 0x5773c018-0x57749457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x000000005773c017] usable [ 0.000000] reserve setup_data: [mem 0x000000005773c018-0x0000000057749457] usable [ 0.000000] reserve setup_data: [mem 0x0000000057749458-0x000000005774a017] usable [ 0.000000] reserve setup_data: [mem 0x000000005774a018-0x0000000057758057] usable [ 0.000000] reserve setup_data: [mem 0x0000000057758058-0x0000000057759017] usable [ 0.000000] reserve setup_data: [mem 0x0000000057759018-0x000000005776b857] usable [ 0.000000] reserve setup_data: [mem 0x000000005776b858-0x000000005776c017] usable [ 0.000000] reserve setup_data: [mem 0x000000005776c018-0x000000005777e857] usable [ 0.000000] reserve setup_data: [mem 0x000000005777e858-0x000000005b880fff] usable [ 0.000000] reserve setup_data: [mem 0x000000005b881000-0x000000005b9a3fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000005b9a4000-0x000000005bb30fff] usable [ 0.000000] reserve setup_data: [mem 0x000000005bb31000-0x000000005bf71fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000005bf72000-0x000000005cb8efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000005cb8f000-0x000000005effffff] usable [ 0.000000] reserve setup_data: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x5bf25000 ACPI 2.0=0x5bebe000 ACPI=0x5bebe000 SMBIOS=0x5c9e8000 SMBIOS 3.0=0x5c9e7000 MEMATTR=0x5a2b1018 ESRT=0x5a1f1298 TPMEventLog=0x578c8018 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B450M DS3H/B450M DS3H-CF, BIOS F50 11/27/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3493.751 MHz processor [ 0.000838] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000839] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000844] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000848] MTRR default type: uncachable [ 0.000848] MTRR fixed ranges enabled: [ 0.000849] 00000-9FFFF write-back [ 0.000850] A0000-BFFFF write-through [ 0.000851] C0000-FFFFF write-protect [ 0.000851] MTRR variable ranges enabled: [ 0.000852] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000853] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000854] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000854] 3 disabled [ 0.000855] 4 disabled [ 0.000855] 5 disabled [ 0.000855] 6 disabled [ 0.000856] 7 disabled [ 0.000856] TOM2: 0000000220000000 aka 8704M [ 0.001101] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001149] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001154] last_pfn = 0x5f000 max_arch_pfn = 0x400000000 [ 0.004940] esrt: Reserving ESRT space from 0x000000005a1f1298 to 0x000000005a1f12d0. [ 0.005027] Using GB pages for direct mapping [ 0.005029] BRK [0x185001000, 0x185001fff] PGTABLE [ 0.005030] BRK [0x185002000, 0x185002fff] PGTABLE [ 0.005030] BRK [0x185003000, 0x185003fff] PGTABLE [ 0.005070] BRK [0x185004000, 0x185004fff] PGTABLE [ 0.005072] BRK [0x185005000, 0x185005fff] PGTABLE [ 0.005243] BRK [0x185006000, 0x185006fff] PGTABLE [ 0.005338] BRK [0x185007000, 0x185007fff] PGTABLE [ 0.005401] BRK [0x185008000, 0x185008fff] PGTABLE [ 0.005437] BRK [0x185009000, 0x185009fff] PGTABLE [ 0.005483] BRK [0x18500a000, 0x18500afff] PGTABLE [ 0.005717] BRK [0x18500b000, 0x18500bfff] PGTABLE [ 0.005784] BRK [0x18500c000, 0x18500cfff] PGTABLE [ 0.005956] RAMDISK: [mem 0x3b23f000-0x3e91dfff] [ 0.005966] ACPI: Early table checksum verification disabled [ 0.005969] ACPI: RSDP 0x000000005BEBE000 000024 (v02 ALASKA) [ 0.005971] ACPI: XSDT 0x000000005BEBE0A8 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005975] ACPI: FACP 0x000000005BEC4E40 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.005979] ACPI: DSDT 0x000000005BEBE218 006C25 (v02 ALASKA A M I 01072009 INTL 20160930) [ 0.005981] ACPI: FACS 0x000000005BF5AE00 000040 [ 0.005983] ACPI: APIC 0x000000005BEC4F58 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.005985] ACPI: FPDT 0x000000005BEC50B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005987] ACPI: FIDT 0x000000005BEC5100 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005989] ACPI: SSDT 0x000000005BEC51A0 000060 (v02 ALASKA A M I 01072009 AMI 01072009) [ 0.005991] ACPI: SSDT 0x000000005BEC5200 005419 (v02 ALASKA A M I 00000002 MSFT 04000000) [ 0.005993] ACPI: SSDT 0x000000005BECA620 003699 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005995] ACPI: MCFG 0x000000005BECDCC0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.005997] ACPI: SSDT 0x000000005BECDD00 006825 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005998] ACPI: HPET 0x000000005BED4528 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.006000] ACPI: UEFI 0x000000005BED4560 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.006002] ACPI: TPM2 0x000000005BED45A8 000038 (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.006004] ACPI: IVRS 0x000000005BED45E0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000) [ 0.006006] ACPI: SSDT 0x000000005BED46B0 0008E0 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.006007] ACPI: CRAT 0x000000005BED4F90 000490 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.006009] ACPI: CDIT 0x000000005BED5420 000029 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.006011] ACPI: SSDT 0x000000005BED5450 0012BE (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.006013] ACPI: SSDT 0x000000005BED6710 00146E (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.006014] ACPI: SSDT 0x000000005BED7B80 001EC3 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.006016] ACPI: SSDT 0x000000005BED9A48 0000BF (v01 ALASKA A M I 00001000 INTL 20160930) [ 0.006018] ACPI: WSMT 0x000000005BED9B08 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.006020] ACPI: SSDT 0x000000005BED9B30 0013F0 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.006027] ACPI: Local APIC address 0xfee00000 [ 0.006151] No NUMA configuration found [ 0.006152] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.006159] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.017532] Zone ranges: [ 0.017534] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017535] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017536] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.017536] Device empty [ 0.017537] Movable zone start for each node [ 0.017539] Early memory node ranges [ 0.017540] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.017541] node 0: [mem 0x0000000000100000-0x0000000009e01fff] [ 0.017541] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.017542] node 0: [mem 0x000000000a20b000-0x000000000affffff] [ 0.017542] node 0: [mem 0x000000000b020000-0x000000005b880fff] [ 0.017543] node 0: [mem 0x000000005b9a4000-0x000000005bb30fff] [ 0.017543] node 0: [mem 0x000000005cb8f000-0x000000005effffff] [ 0.017543] node 0: [mem 0x0000000100000000-0x000000021f33ffff] [ 0.017622] Zeroed struct page in unavailable ranges: 9227 pages [ 0.017624] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.017625] On node 0 totalpages: 1560373 [ 0.017626] DMA zone: 64 pages used for memmap [ 0.017627] DMA zone: 30 pages reserved [ 0.017627] DMA zone: 3999 pages, LIFO batch:0 [ 0.017671] DMA32 zone: 5938 pages used for memmap [ 0.017671] DMA32 zone: 379990 pages, LIFO batch:63 [ 0.023910] Normal zone: 18381 pages used for memmap [ 0.023912] Normal zone: 1176384 pages, LIFO batch:63 [ 0.035778] ACPI: PM-Timer IO Port: 0x808 [ 0.035780] ACPI: Local APIC address 0xfee00000 [ 0.035787] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.035807] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.035817] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.035819] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.035820] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.035821] ACPI: IRQ0 used by override. [ 0.035821] ACPI: IRQ9 used by override. [ 0.035823] Using ACPI (MADT) for SMP configuration information [ 0.035824] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.035828] smpboot: Allowing 32 CPUs, 28 hotplug CPUs [ 0.035845] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.035847] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.035848] PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff] [ 0.035849] PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff] [ 0.035850] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.035851] PM: Registered nosave memory: [mem 0x5773c000-0x5773cfff] [ 0.035852] PM: Registered nosave memory: [mem 0x57749000-0x57749fff] [ 0.035853] PM: Registered nosave memory: [mem 0x5774a000-0x5774afff] [ 0.035854] PM: Registered nosave memory: [mem 0x57758000-0x57758fff] [ 0.035854] PM: Registered nosave memory: [mem 0x57759000-0x57759fff] [ 0.035855] PM: Registered nosave memory: [mem 0x5776b000-0x5776bfff] [ 0.035856] PM: Registered nosave memory: [mem 0x5776c000-0x5776cfff] [ 0.035857] PM: Registered nosave memory: [mem 0x5777e000-0x5777efff] [ 0.035858] PM: Registered nosave memory: [mem 0x5b881000-0x5b9a3fff] [ 0.035859] PM: Registered nosave memory: [mem 0x5bb31000-0x5bf71fff] [ 0.035860] PM: Registered nosave memory: [mem 0x5bf72000-0x5cb8efff] [ 0.035861] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff] [ 0.035861] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.035862] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.035862] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.035862] PM: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.035864] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.035866] Booting paravirtualized kernel on bare hardware [ 0.035868] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.124195] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.125590] percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u262144 [ 0.125599] pcpu-alloc: s176128 r8192 d28672 u262144 alloc=1*2097152 [ 0.125599] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.125603] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.125638] Built 1 zonelists, mobility grouping on. Total pages: 1535960 [ 0.125639] Policy zone: Normal [ 0.125640] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz root=live:CDLABEL=FEDORA-WS-L rd.live.image quiet [ 0.126505] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.126904] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.126977] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.143529] Memory: 5864612K/6241492K available (12291K kernel code, 1541K rwdata, 4564K rodata, 2272K init, 4468K bss, 376880K reserved, 0K cma-reserved) [ 0.143854] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.143874] ftrace: allocating 40062 entries in 157 pages [ 0.155135] rcu: Hierarchical RCU implementation. [ 0.155136] rcu: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=32. [ 0.155137] Tasks RCU enabled. [ 0.155137] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.155138] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.157130] NR_IRQS: 65792, nr_irqs: 1224, preallocated irqs: 16 [ 0.157589] random: crng done (trusting CPU's manufacturer) [ 0.157634] Console: colour dummy device 80x25 [ 0.157637] printk: console [tty0] enabled [ 0.157663] ACPI: Core revision 20190703 [ 0.157843] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.157873] APIC: Switch to symmetric I/O mode setup [ 0.481566] Switched APIC routing to physical flat. [ 0.482941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.487847] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325c4190b5b, max_idle_ns: 440795209559 ns [ 0.487851] Calibrating delay loop (skipped), value calculated using timer frequency.. 6987.50 BogoMIPS (lpj=3493751) [ 0.487852] pid_max: default: 32768 minimum: 301 [ 0.490924] LSM: Security Framework initializing [ 0.490940] Yama: becoming mindful. [ 0.490950] SELinux: Initializing. [ 0.490981] *** VALIDATE SELinux *** [ 0.491036] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.491051] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.491238] *** VALIDATE proc *** [ 0.491305] *** VALIDATE cgroup1 *** [ 0.491306] *** VALIDATE cgroup2 *** [ 0.491377] LVT offset 1 assigned for vector 0xf9 [ 0.491420] LVT offset 2 assigned for vector 0xf4 [ 0.491432] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.491433] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.491435] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.491436] Spectre V2 : Mitigation: Full AMD retpoline [ 0.491436] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.491437] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.491438] Spectre V2 : User space: Vulnerable [ 0.491439] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.491613] Freeing SMP alternatives memory: 36K [ 0.594803] smpboot: CPU0: AMD Athlon 3000G with Radeon Vega Graphics (family: 0x17, model: 0x18, stepping: 0x1) [ 0.594848] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.594848] ... version: 0 [ 0.594848] ... bit width: 48 [ 0.594848] ... generic registers: 6 [ 0.594848] ... value mask: 0000ffffffffffff [ 0.594848] ... max period: 00007fffffffffff [ 0.594848] ... fixed-purpose events: 0 [ 0.594848] ... event mask: 000000000000003f [ 0.594848] rcu: Hierarchical SRCU implementation. [ 0.594848] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.594848] smp: Bringing up secondary CPUs ... [ 0.594848] x86: Booting SMP configuration: [ 0.594848] .... node #0, CPUs: #1 #2 #3 [ 0.597892] smp: Brought up 1 node, 4 CPUs [ 0.597892] smpboot: Max logical packages: 8 [ 0.597892] smpboot: Total of 4 processors activated (27950.00 BogoMIPS) [ 0.599063] devtmpfs: initialized [ 0.599063] x86/mm: Memory block size: 128MB [ 0.599275] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes) [ 0.599275] PM: Registering ACPI NVS region [mem 0x5bb31000-0x5bf71fff] (4460544 bytes) [ 0.599942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.599942] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.600080] pinctrl core: initialized pinctrl subsystem [ 0.600176] PM: RTC time: 16:59:05, date: 2020-01-05 [ 0.600353] NET: Registered protocol family 16 [ 0.600418] audit: initializing netlink subsys (disabled) [ 0.600423] audit: type=2000 audit(1578243544.120:1): state=initialized audit_enabled=0 res=1 [ 0.600423] cpuidle: using governor menu [ 0.600423] ACPI: bus type PCI registered [ 0.600423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.600423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.600423] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.600423] PCI: Using configuration type 1 for base access [ 0.602245] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.602245] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.699873] cryptd: max_cpu_qlen set to 1000 [ 0.701859] alg: No test for lzo-rle (lzo-rle-generic) [ 0.701859] alg: No test for lzo-rle (lzo-rle-scomp) [ 0.701865] alg: No test for 842 (842-generic) [ 0.701865] alg: No test for 842 (842-scomp) [ 0.703984] ACPI: Added _OSI(Module Device) [ 0.703984] ACPI: Added _OSI(Processor Device) [ 0.703984] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.703984] ACPI: Added _OSI(Processor Aggregator Device) [ 0.703984] ACPI: Added _OSI(Linux-Dell-Video) [ 0.703984] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.703984] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.712806] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.713711] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.718343] ACPI: Interpreter enabled [ 0.718356] ACPI: (supports S0 S3 S4 S5) [ 0.718357] ACPI: Using IOAPIC for interrupt routing [ 0.718652] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.718922] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.725314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.725318] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.725426] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.725525] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.725533] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.725756] PCI host bridge to bus 0000:00 [ 0.725757] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.725758] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.725759] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.725760] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.725761] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.725761] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.725762] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.725763] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.725764] pci_bus 0000:00: root bus resource [mem 0x21f340000-0x7fffffffff window] [ 0.725765] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.725774] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.725892] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.726035] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.726129] pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400 [ 0.726181] pci 0000:00:01.1: enabling Extended Tags [ 0.726235] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.726330] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.726382] pci 0000:00:01.2: enabling Extended Tags [ 0.726436] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.726549] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.726649] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.726707] pci 0000:00:08.1: enabling Extended Tags [ 0.726764] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.726860] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.726918] pci 0000:00:08.2: enabling Extended Tags [ 0.726974] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.727097] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.727296] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.727487] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.727524] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.727561] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.727597] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.727634] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.727672] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.727709] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.727745] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.727879] pci 0000:01:00.0: [8086:10b9] type 00 class 0x020000 [ 0.727922] pci 0000:01:00.0: reg 0x10: [mem 0xfcf40000-0xfcf5ffff] [ 0.727939] pci 0000:01:00.0: reg 0x14: [mem 0xfcf20000-0xfcf3ffff] [ 0.727955] pci 0000:01:00.0: reg 0x18: [io 0xf000-0xf01f] [ 0.728019] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf1ffff pref] [ 0.728120] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.728229] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.728239] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.728244] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.728246] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.728314] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.728345] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 0.728396] pci 0000:02:00.0: enabling Extended Tags [ 0.728469] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.728520] pci 0000:02:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0000:00:01.2 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 0.728569] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601 [ 0.728635] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 0.728644] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 0.728652] pci 0000:02:00.1: enabling Extended Tags [ 0.728704] pci 0000:02:00.1: PME# supported from D3hot D3cold [ 0.728769] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400 [ 0.728831] pci 0000:02:00.2: enabling Extended Tags [ 0.728890] pci 0000:02:00.2: PME# supported from D3hot D3cold [ 0.729004] pci 0000:00:01.2: PCI bridge to [bus 02-06] [ 0.729008] pci 0000:00:01.2: bridge window [io 0xc000-0xdfff] [ 0.729011] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff] [ 0.729015] pci 0000:00:01.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.729104] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400 [ 0.729171] pci 0000:03:00.0: enabling Extended Tags [ 0.729243] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.729331] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400 [ 0.729398] pci 0000:03:01.0: enabling Extended Tags [ 0.729471] pci 0000:03:01.0: PME# supported from D3hot D3cold [ 0.729561] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400 [ 0.729629] pci 0000:03:04.0: enabling Extended Tags [ 0.729700] pci 0000:03:04.0: PME# supported from D3hot D3cold [ 0.729810] pci 0000:02:00.2: PCI bridge to [bus 03-06] [ 0.729816] pci 0000:02:00.2: bridge window [io 0xc000-0xdfff] [ 0.729819] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.729825] pci 0000:02:00.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.729902] pci 0000:04:00.0: [8086:10b9] type 00 class 0x020000 [ 0.729958] pci 0000:04:00.0: reg 0x10: [mem 0xfcc40000-0xfcc5ffff] [ 0.729980] pci 0000:04:00.0: reg 0x14: [mem 0xfcc20000-0xfcc3ffff] [ 0.730002] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.730089] pci 0000:04:00.0: reg 0x30: [mem 0xfcc00000-0xfcc1ffff pref] [ 0.730225] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.730351] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.730364] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.730370] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] [ 0.730374] pci 0000:03:00.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.730448] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.730495] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.730537] pci 0000:05:00.0: reg 0x18: [mem 0xfcb00000-0xfcb00fff 64bit] [ 0.730563] pci 0000:05:00.0: reg 0x20: [mem 0x7ffff00000-0x7ffff03fff 64bit pref] [ 0.730728] pci 0000:05:00.0: supports D1 D2 [ 0.730728] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.730918] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.730924] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.730928] pci 0000:03:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.730934] pci 0000:03:01.0: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.730981] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.731110] pci 0000:07:00.0: [1002:15d8] type 00 class 0x030000 [ 0.731154] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.731171] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.731183] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.731194] pci 0000:07:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 0.731214] pci 0000:07:00.0: enabling Extended Tags [ 0.731228] pci 0000:07:00.0: BAR 0: assigned to efifb [ 0.731327] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.731444] pci 0000:07:00.1: [1002:15de] type 00 class 0x040300 [ 0.731473] pci 0000:07:00.1: reg 0x10: [mem 0xfca80000-0xfca83fff] [ 0.731544] pci 0000:07:00.1: enabling Extended Tags [ 0.731613] pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.731674] pci 0000:07:00.2: [1022:15df] type 00 class 0x108000 [ 0.731723] pci 0000:07:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] [ 0.731755] pci 0000:07:00.2: reg 0x24: [mem 0xfca84000-0xfca85fff] [ 0.731774] pci 0000:07:00.2: enabling Extended Tags [ 0.731921] pci 0000:07:00.3: [1022:15e5] type 00 class 0x0c0330 [ 0.731955] pci 0000:07:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 0.732016] pci 0000:07:00.3: enabling Extended Tags [ 0.732092] pci 0000:07:00.3: PME# supported from D0 D3hot D3cold [ 0.732221] pci 0000:00:08.1: PCI bridge to [bus 07] [ 0.732227] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.732229] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff] [ 0.732235] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.732310] pci 0000:08:00.0: [1022:7901] type 00 class 0x010601 [ 0.732392] pci 0000:08:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 0.732411] pci 0000:08:00.0: enabling Extended Tags [ 0.732489] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.732590] pci 0000:00:08.2: PCI bridge to [bus 08] [ 0.732597] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.733032] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733076] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733111] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733160] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733202] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733236] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733269] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733303] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.733868] pci 0000:07:00.0: vgaarb: setting as boot VGA device [ 0.733869] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.733870] pci 0000:07:00.0: vgaarb: bridge control possible [ 0.733871] vgaarb: loaded [ 0.733964] SCSI subsystem initialized [ 0.733980] libata version 3.00 loaded. [ 0.733980] ACPI: bus type USB registered [ 0.733980] usbcore: registered new interface driver usbfs [ 0.733980] usbcore: registered new interface driver hub [ 0.733980] usbcore: registered new device driver usb [ 0.733980] pps_core: LinuxPPS API ver. 1 registered [ 0.733980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.733980] PTP clock support registered [ 0.733980] EDAC MC: Ver: 3.0.0 [ 0.733980] Registered efivars operations [ 0.733980] PCI: Using ACPI for IRQ routing [ 0.737016] PCI: pci_cache_line_size set to 64 bytes [ 0.737112] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.737114] e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff] [ 0.737115] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.737116] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.737116] e820: reserve RAM buffer [mem 0x5773c018-0x57ffffff] [ 0.737117] e820: reserve RAM buffer [mem 0x5774a018-0x57ffffff] [ 0.737118] e820: reserve RAM buffer [mem 0x57759018-0x57ffffff] [ 0.737119] e820: reserve RAM buffer [mem 0x5776c018-0x57ffffff] [ 0.737120] e820: reserve RAM buffer [mem 0x5b881000-0x5bffffff] [ 0.737120] e820: reserve RAM buffer [mem 0x5bb31000-0x5bffffff] [ 0.737121] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff] [ 0.737122] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.737848] NetLabel: Initializing [ 0.737848] NetLabel: domain hash size = 128 [ 0.737848] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.737848] NetLabel: unlabeled traffic allowed by default [ 0.737892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.737894] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.739871] clocksource: Switched to clocksource tsc-early [ 0.750549] VFS: Disk quotas dquot_6.6.0 [ 0.750571] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.750604] *** VALIDATE hugetlbfs *** [ 0.750641] pnp: PnP ACPI init [ 0.750742] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.750746] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.750793] system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved [ 0.750795] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.750912] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.751024] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.751026] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.751026] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.751029] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.751323] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.751325] system 00:04: [io 0x040b] has been reserved [ 0.751325] system 00:04: [io 0x04d6] has been reserved [ 0.751326] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.751327] system 00:04: [io 0x0c14] has been reserved [ 0.751328] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.751329] system 00:04: [io 0x0c52] has been reserved [ 0.751329] system 00:04: [io 0x0c6c] has been reserved [ 0.751330] system 00:04: [io 0x0c6f] has been reserved [ 0.751331] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.751332] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.751332] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.751333] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.751334] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.751335] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.751335] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.751336] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.751337] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.751338] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.751339] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.751340] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.751341] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.751342] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.751343] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.751344] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.751345] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.751347] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.751703] pnp: PnP ACPI: found 5 devices [ 0.752723] thermal_sys: Registered thermal governor 'fair_share' [ 0.752723] thermal_sys: Registered thermal governor 'bang_bang' [ 0.752724] thermal_sys: Registered thermal governor 'step_wise' [ 0.752724] thermal_sys: Registered thermal governor 'user_space' [ 0.757326] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.757373] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.757376] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.757381] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.757391] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.757393] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] [ 0.757397] pci 0000:03:00.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.757406] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.757408] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.757413] pci 0000:03:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.757416] pci 0000:03:01.0: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757422] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.757435] pci 0000:02:00.2: PCI bridge to [bus 03-06] [ 0.757437] pci 0000:02:00.2: bridge window [io 0xc000-0xdfff] [ 0.757441] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.757444] pci 0000:02:00.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757450] pci 0000:00:01.2: PCI bridge to [bus 02-06] [ 0.757452] pci 0000:00:01.2: bridge window [io 0xc000-0xdfff] [ 0.757456] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff] [ 0.757459] pci 0000:00:01.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757465] pci 0000:00:08.1: PCI bridge to [bus 07] [ 0.757471] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.757476] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff] [ 0.757479] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.757484] pci 0000:00:08.2: PCI bridge to [bus 08] [ 0.757489] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.757498] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.757499] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.757499] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.757500] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.757501] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.757502] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.757503] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.757504] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.757504] pci_bus 0000:00: resource 12 [mem 0x21f340000-0x7fffffffff window] [ 0.757505] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.757506] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.757507] pci_bus 0000:02: resource 0 [io 0xc000-0xdfff] [ 0.757507] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff] [ 0.757508] pci_bus 0000:02: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757509] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff] [ 0.757510] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff] [ 0.757510] pci_bus 0000:03: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757511] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.757512] pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.757513] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.757513] pci_bus 0000:05: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 0.757514] pci_bus 0000:05: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.757515] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.757516] pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfcafffff] [ 0.757516] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.757517] pci_bus 0000:08: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.757599] NET: Registered protocol family 2 [ 0.757772] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.757781] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.757845] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.757952] TCP: Hash tables configured (established 65536 bind 65536) [ 0.757994] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758008] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758112] NET: Registered protocol family 1 [ 0.758118] NET: Registered protocol family 44 [ 0.758288] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.758295] pci 0000:07:00.1: D0 power state depends on 0000:07:00.0 [ 0.769920] pci 0000:07:00.3: quirk_usb_early_handoff+0x0/0x645 took 11341 usecs [ 0.769925] PCI: CLS 64 bytes, default 64 [ 0.769953] Trying to unpack rootfs image as initramfs... [ 4.132732] Freeing initrd memory: 56188K [ 4.132787] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter. [ 4.132877] pci 0000:00:00.2: can't derive routing for PCI INT A [ 4.132878] pci 0000:00:00.2: PCI INT A: not connected [ 4.133313] pci 0000:00:01.0: Adding to iommu group 0 [ 4.133340] pci 0000:00:01.1: Adding to iommu group 0 [ 4.133365] pci 0000:00:01.2: Adding to iommu group 0 [ 4.133577] pci 0000:00:08.0: Adding to iommu group 1 [ 4.133603] pci 0000:00:08.1: Adding to iommu group 1 [ 4.133627] pci 0000:00:08.2: Adding to iommu group 1 [ 4.133858] pci 0000:00:14.0: Adding to iommu group 2 [ 4.133881] pci 0000:00:14.3: Adding to iommu group 2 [ 4.134106] pci 0000:00:18.0: Adding to iommu group 3 [ 4.134128] pci 0000:00:18.1: Adding to iommu group 3 [ 4.134148] pci 0000:00:18.2: Adding to iommu group 3 [ 4.134169] pci 0000:00:18.3: Adding to iommu group 3 [ 4.134192] pci 0000:00:18.4: Adding to iommu group 3 [ 4.134213] pci 0000:00:18.5: Adding to iommu group 3 [ 4.134233] pci 0000:00:18.6: Adding to iommu group 3 [ 4.134254] pci 0000:00:18.7: Adding to iommu group 3 [ 4.134279] pci 0000:01:00.0: Adding to iommu group 0 [ 4.134304] pci 0000:02:00.0: Adding to iommu group 0 [ 4.134326] pci 0000:02:00.1: Adding to iommu group 0 [ 4.134347] pci 0000:02:00.2: Adding to iommu group 0 [ 4.134371] pci 0000:03:00.0: Adding to iommu group 0 [ 4.134394] pci 0000:03:01.0: Adding to iommu group 0 [ 4.134417] pci 0000:03:04.0: Adding to iommu group 0 [ 4.134444] pci 0000:04:00.0: Adding to iommu group 0 [ 4.134474] pci 0000:05:00.0: Adding to iommu group 0 [ 4.134543] pci 0000:07:00.0: Adding to iommu group 1 [ 4.134587] pci 0000:07:00.1: Adding to iommu group 1 [ 4.134632] pci 0000:07:00.2: Adding to iommu group 1 [ 4.134677] pci 0000:07:00.3: Adding to iommu group 1 [ 4.134724] pci 0000:08:00.0: Adding to iommu group 1 [ 4.134967] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 4.134968] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada): [ 4.134968] PPR NX GT IA GA PC GA_vAPIC [ 4.134970] AMD-Vi: Interrupt remapping enabled [ 4.134970] AMD-Vi: Virtual APIC enabled [ 4.135128] AMD-Vi: Lazy IO/TLB flushing enabled [ 4.136285] amd_uncore: AMD NB counters detected [ 4.136295] amd_uncore: AMD LLC counters detected [ 4.138439] Initialise system trusted keyrings [ 4.138452] Key type blacklist registered [ 4.138503] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 4.139670] zbud: loaded [ 4.140242] Platform Keyring initialized [ 4.144527] NET: Registered protocol family 38 [ 4.144531] Key type asymmetric registered [ 4.144532] Asymmetric key parser 'x509' registered [ 4.144544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 4.144581] io scheduler mq-deadline registered [ 4.144582] io scheduler kyber registered [ 4.144607] io scheduler bfq registered [ 4.144669] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 4.144837] pcieport 0000:00:01.1: PME: Signaling with IRQ 26 [ 4.144981] pcieport 0000:00:01.2: PME: Signaling with IRQ 27 [ 4.145109] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 4.145299] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 4.145939] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.145952] efifb: probing for efifb [ 4.145968] efifb: No BGRT, not showing boot graphics [ 4.145969] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 4.145969] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 4.145970] efifb: scrolling: redraw [ 4.145970] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.146011] fbcon: Deferring console take-over [ 4.146011] fb0: EFI VGA frame buffer device [ 4.146099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.146105] ACPI: Power Button [PWRB] [ 4.146131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 4.146145] ACPI: Power Button [PWRF] [ 4.146204] Monitor-Mwait will be used to enter C-1 state [ 5.183125] tsc: Refined TSC clocksource calibration: 3495.341 MHz [ 5.183149] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32621fc38a1, max_idle_ns: 440795350861 ns [ 5.183182] clocksource: Switched to clocksource tsc [ 6.207629] ACPI: Invalid passive threshold [ 6.207823] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.207824] ACPI: Thermal Zone [TZ10] (17 C) [ 6.208021] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.209469] Non-volatile memory driver v1.3 [ 6.209488] Linux agpgart interface v0.103 [ 6.232906] ahci 0000:02:00.1: version 3.0 [ 6.233108] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 6.233153] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 6.233157] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 6.233644] scsi host0: ahci [ 6.233764] scsi host1: ahci [ 6.233859] scsi host2: ahci [ 6.233940] scsi host3: ahci [ 6.234005] scsi host4: ahci [ 6.234083] scsi host5: ahci [ 6.234162] scsi host6: ahci [ 6.234246] scsi host7: ahci [ 6.234290] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 37 [ 6.234291] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 37 [ 6.234292] ata3: DUMMY [ 6.234292] ata4: DUMMY [ 6.234294] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 37 [ 6.234296] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 37 [ 6.234296] ata7: DUMMY [ 6.234296] ata8: DUMMY [ 6.244840] ahci 0000:08:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 6.244844] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 6.245339] scsi host8: ahci [ 6.245492] scsi host9: ahci [ 6.245574] ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 39 [ 6.245577] ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00180 irq 40 [ 6.245719] libphy: Fixed MDIO Bus: probed [ 6.245831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.245834] ehci-pci: EHCI PCI platform driver [ 6.245860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.245862] ohci-pci: OHCI PCI platform driver [ 6.245873] uhci_hcd: USB Universal Host Controller Interface driver [ 6.246010] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 6.246051] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 6.301330] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 6.301665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 6.301666] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.301667] usb usb1: Product: xHCI Host Controller [ 6.301668] usb usb1: Manufacturer: Linux 5.3.7-301.fc31.x86_64 xhci-hcd [ 6.301669] usb usb1: SerialNumber: 0000:02:00.0 [ 6.301787] hub 1-0:1.0: USB hub found [ 6.301803] hub 1-0:1.0: 10 ports detected [ 6.302049] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 6.302070] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 6.302072] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 6.302128] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.302143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 6.302144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.302145] usb usb2: Product: xHCI Host Controller [ 6.302145] usb usb2: Manufacturer: Linux 5.3.7-301.fc31.x86_64 xhci-hcd [ 6.302146] usb usb2: SerialNumber: 0000:02:00.0 [ 6.302206] hub 2-0:1.0: USB hub found [ 6.302214] hub 2-0:1.0: 4 ports detected [ 6.302274] usb: port power management may be unreliable [ 6.302389] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 6.302412] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3 [ 6.302679] xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 6.303052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 6.303053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.303053] usb usb3: Product: xHCI Host Controller [ 6.303054] usb usb3: Manufacturer: Linux 5.3.7-301.fc31.x86_64 xhci-hcd [ 6.303055] usb usb3: SerialNumber: 0000:07:00.3 [ 6.303115] hub 3-0:1.0: USB hub found [ 6.303130] hub 3-0:1.0: 6 ports detected [ 6.303789] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 6.303811] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4 [ 6.303813] xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 6.303869] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.303884] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 6.303885] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.303885] usb usb4: Product: xHCI Host Controller [ 6.303886] usb usb4: Manufacturer: Linux 5.3.7-301.fc31.x86_64 xhci-hcd [ 6.303887] usb usb4: SerialNumber: 0000:07:00.3 [ 6.303939] hub 4-0:1.0: USB hub found [ 6.303951] hub 4-0:1.0: 4 ports detected [ 6.304121] usbcore: registered new interface driver usbserial_generic [ 6.304124] usbserial: USB Serial support registered for generic [ 6.304137] i8042: PNP: No PS/2 controller found. [ 6.304159] mousedev: PS/2 mouse device common for all mice [ 6.304231] rtc_cmos 00:02: RTC can wake from S4 [ 6.304422] rtc_cmos 00:02: registered as rtc0 [ 6.304423] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.304466] device-mapper: uevent: version 1.0.3 [ 6.304508] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 6.304710] hidraw: raw HID events driver (C) Jiri Kosina [ 6.304734] usbcore: registered new interface driver usbhid [ 6.304735] usbhid: USB HID core driver [ 6.304821] drop_monitor: Initializing network drop monitor service [ 6.304888] Initializing XFRM netlink socket [ 6.305003] NET: Registered protocol family 10 [ 6.308767] Segment Routing with IPv6 [ 6.308783] mip6: Mobile IPv6 [ 6.308784] NET: Registered protocol family 17 [ 6.309132] RAS: Correctable Errors collector initialized. [ 6.309159] microcode: CPU0: patch_level=0x08108109 [ 6.309164] microcode: CPU1: patch_level=0x08108109 [ 6.309168] microcode: CPU2: patch_level=0x08108109 [ 6.309171] microcode: CPU3: patch_level=0x08108109 [ 6.309174] microcode: Microcode Update Driver: v2.2. [ 6.309181] AVX2 version of gcm_enc/dec engaged. [ 6.309182] AES CTR mode by8 optimization enabled [ 6.333289] sched_clock: Marking stable (6010797837, 322483474)->(6337483564, -4202253) [ 6.333415] registered taskstats version 1 [ 6.333422] Loading compiled-in X.509 certificates [ 6.357771] Loaded X.509 cert 'Fedora kernel signing key: 35b9bf900cc16b09a72ff9b56b453d9391f8905c' [ 6.357791] zswap: loaded using pool lzo/zbud [ 6.362949] Key type big_key registered [ 6.365155] Key type encrypted registered [ 6.365978] ima: Allocated hash algorithm: sha256 [ 6.393962] No architecture policies found [ 6.394486] PM: Magic number: 4:483:994 [ 6.394543] acpi STK0004A:00: hash matches [ 6.394563] memory memory37: hash matches [ 6.394642] rtc_cmos 00:02: setting system clock to 2020-01-05T16:59:10 UTC (1578243550) [ 6.556308] ata10: SATA link down (SStatus 0 SControl 300) [ 6.556359] ata9: SATA link down (SStatus 0 SControl 300) [ 6.665210] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 6.678260] usb 4-2: New USB device found, idVendor=0bc2, idProduct=2312, bcdDevice= 6.36 [ 6.678262] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.678263] usb 4-2: Product: Expansion [ 6.678264] usb 4-2: Manufacturer: Seagate [ 6.678265] usb 4-2: SerialNumber: NA498QPB [ 6.687140] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 6.695024] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.695634] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 [ 6.695637] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 6.695975] ata1.00: configured for UDMA/133 [ 6.696178] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 [ 6.696326] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.696452] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 6.696477] sd 0:0:0:0: [sda] Write Protect is off [ 6.696480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.696506] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.697666] sda: sda1 sda2 sda3 sda4 [ 6.698163] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.911423] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=61.70 [ 6.911427] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.911429] usb 1-2: Product: USB2.1 Hub [ 6.911431] usb 1-2: Manufacturer: GenesysLogic [ 6.918441] hub 1-2:1.0: USB hub found [ 6.922408] hub 1-2:1.0: 4 ports detected [ 7.167083] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.167897] ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 7.167899] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32) [ 7.168739] ata2.00: configured for UDMA/133 [ 7.168971] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 7.169121] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.169159] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.169173] sd 1:0:0:0: [sdb] Write Protect is off [ 7.169175] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.169206] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.222494] sdb: sdb1 sdb2 [ 7.223104] sd 1:0:0:0: [sdb] Attached SCSI disk [ 7.286095] usb 1-2.1: new high-speed USB device number 3 using xhci_hcd [ 7.428134] usb 1-2.1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00 [ 7.428138] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.428140] usb 1-2.1: Product: DataTraveler 2.0 [ 7.428142] usb 1-2.1: Manufacturer: Kingston [ 7.428143] usb 1-2.1: SerialNumber: 50E549C695ADEE40B9C40822 [ 7.545101] usb 1-2.2: new low-speed USB device number 4 using xhci_hcd [ 7.638897] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.639571] ata5.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133 [ 7.639573] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 7.640174] ata5.00: configured for UDMA/133 [ 7.640398] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 7.640561] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.640631] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.640633] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 7.640652] sd 4:0:0:0: [sdc] Write Protect is off [ 7.640653] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.640677] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.703031] sdc: sdc1 sdc2 [ 7.703848] sd 4:0:0:0: [sdc] Attached SCSI disk [ 7.809193] usb 1-2.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 7.809196] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7.809199] usb 1-2.2: Product: Dell KB216 Wired Keyboard [ 7.850550] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:413C:2113.0001/input/input2 [ 7.902358] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-2.2/input0 [ 7.938575] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:413C:2113.0002/input/input3 [ 7.990288] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:413C:2113.0002/input/input4 [ 7.990387] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-2.2/input1 [ 8.094098] usb 1-2.4: new full-speed USB device number 5 using xhci_hcd [ 8.111042] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8.111583] ata6.00: ATA-8: WDC WD3000F9YZ-09N20L0, 01.01A01, max UDMA/133 [ 8.111586] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 8.112081] ata6.00: configured for UDMA/133 [ 8.112313] scsi 5:0:0:0: Direct-Access ATA WDC WD3000F9YZ-0 1A01 PQ: 0 ANSI: 5 [ 8.112492] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 8.112530] sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 8.112532] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 8.112546] sd 5:0:0:0: [sdd] Write Protect is off [ 8.112548] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 8.112570] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.165316] sdd: sdd1 sdd2 [ 8.166066] sd 5:0:0:0: [sdd] Attached SCSI disk [ 8.167397] Freeing unused decrypted memory: 2040K [ 8.167781] Freeing unused kernel image memory: 2272K [ 8.170875] Write protecting the kernel read-only data: 20480k [ 8.171368] Freeing unused kernel image memory: 2016K [ 8.171663] Freeing unused kernel image memory: 1580K [ 8.180203] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.180208] rodata_test: all tests were successful [ 8.180211] Run /init as init process [ 8.214420] systemd[1]: systemd v243-4.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 8.225888] systemd[1]: Detected architecture x86-64. [ 8.225890] systemd[1]: Running in initial RAM disk. [ 8.225898] systemd[1]: No hostname configured. [ 8.225901] systemd[1]: Set hostname to . [ 8.225921] systemd[1]: Initializing machine ID from random generator. [ 8.260535] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 8.260792] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. [ 8.264222] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.264250] systemd[1]: Reached target Local Encrypted Volumes. [ 8.282240] fuse: init (API version 7.31) [ 8.324195] loop: module loaded [ 8.357258] Loading iSCSI transport class v2.0-870. [ 8.364155] iscsi: registered transport (tcp) [ 8.380059] iscsi: registered transport (qla4xxx) [ 8.380076] QLogic iSCSI HBA Driver [ 8.385077] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 8.397042] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) [ 8.397053] iscsi: registered transport (cxgb3i) [ 8.421202] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 8.421212] iscsi: registered transport (cxgb4i) [ 8.421213] cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled. [ 8.426357] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 8.430934] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 8.430949] iscsi: registered transport (bnx2i) [ 8.437979] iscsi: registered transport (be2iscsi) [ 8.437980] In beiscsi_module_init, tt=0000000051da3697 [ 8.445871] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 8.445873] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.445874] usb 1-2.4: Product: USB Receiver [ 8.445876] usb 1-2.4: Manufacturer: Logitech [ 8.482745] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C52B.0003/input/input5 [ 8.503688] RPC: Registered named UNIX socket transport module. [ 8.503689] RPC: Registered udp transport module. [ 8.503690] RPC: Registered tcp transport module. [ 8.503690] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.534041] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input0 [ 8.540135] audit: type=1130 audit(1578243552.645:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.555765] audit: type=1130 audit(1578243552.660:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.562212] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input6 [ 8.562482] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input7 [ 8.613926] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input8 [ 8.614027] hid-generic 0003:046D:C52B.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input1 [ 8.635736] hid-generic 0003:046D:C52B.0005: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input2 [ 8.753170] audit: type=1130 audit(1578243552.858:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.813501] audit: type=1130 audit(1578243552.918:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.837421] logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input2 [ 8.883501] audit: type=1130 audit(1578243552.986:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 8.889731] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 8.890283] acpi device:02: registered as cooling_device4 [ 8.890328] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10 [ 8.891204] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 8.891327] acpi device:10: registered as cooling_device5 [ 8.891366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input11 [ 8.914506] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 8.932248] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 8.932249] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.932461] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 8.933451] usb-storage 1-2.1:1.0: USB Mass Storage device detected [ 8.933551] scsi host10: usb-storage 1-2.1:1.0 [ 8.933642] usbcore: registered new interface driver usb-storage [ 8.936652] scsi host11: uas [ 8.936748] usbcore: registered new interface driver uas [ 8.937967] scsi 11:0:0:0: Direct-Access Seagate Expansion 0636 PQ: 0 ANSI: 6 [ 8.939438] sd 11:0:0:0: Attached scsi generic sg4 type 0 [ 8.947223] sd 11:0:0:0: [sde] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 8.947627] sd 11:0:0:0: [sde] Write Protect is off [ 8.947629] sd 11:0:0:0: [sde] Mode Sense: 2b 00 10 08 [ 8.948772] sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 8.954669] sde: sde1 [ 8.955293] input: Logitech Unifying Device. Wireless PID:4063 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input12 [ 8.955426] input: Logitech Unifying Device. Wireless PID:4063 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input13 [ 8.955504] input: Logitech Unifying Device. Wireless PID:4063 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input14 [ 8.955552] input: Logitech Unifying Device. Wireless PID:4063 System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input15 [ 8.955603] hid-generic 0003:046D:4063.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4063] on usb-0000:02:00.0-2.4/input2:1 [ 8.956989] input: Logitech Unifying Device. Wireless PID:4061 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4061.0007/input/input19 [ 8.957131] input: Logitech Unifying Device. Wireless PID:4061 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4061.0007/input/input20 [ 8.957174] input: Logitech Unifying Device. Wireless PID:4061 System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4061.0007/input/input21 [ 8.957217] hid-generic 0003:046D:4061.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4061] on usb-0000:02:00.0-2.4/input2:2 [ 8.957571] sd 11:0:0:0: [sde] Attached SCSI disk [ 9.011427] libphy: r8169: probed [ 9.011655] r8169 0000:05:00.0 eth0: RTL8168g/8111g, b4:2e:99:94:6f:05, XID 4c0, IRQ 54 [ 9.011658] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 9.042702] 8021q: 802.1Q VLAN Support v1.8 [ 9.056427] raid6: using algorithm avx2x4 gen() 0 MB/s [ 9.056428] raid6: .... xor() 0 MB/s, rmw enabled [ 9.056429] raid6: using avx2x2 recovery algorithm [ 9.061235] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 9.071164] xor: automatically using best checksumming function avx [ 9.099168] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:14:9e:b5 [ 9.099170] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 9.099255] e1000e 0000:01:00.0 eth0: MAC: 1, PHY: 4, PBA No: D50869-003 [ 9.099609] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 9.138326] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input25 [ 9.138495] logitech-hidpp-device 0003:046D:4063.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:02:00.0-2.4/input2:1 [ 9.147135] Btrfs loaded, crc32c=crc32c-intel [ 9.148283] BTRFS: device label btrfs-boot devid 1 transid 715 /dev/sda2 [ 9.148508] BTRFS: device fsid 446d32cb-a6da-45f0-9246-1483ad3420e0 devid 1 transid 3842260 /dev/sda3 [ 9.208309] BTRFS: device label 6TB devid 3 transid 515371 /dev/sdb2 [ 9.228288] input: Logitech K370s/K375s as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4061.0007/input/input26 [ 9.228466] logitech-hidpp-device 0003:046D:4061.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K370s/K375s] on usb-0000:02:00.0-2.4/input2:2 [ 9.261056] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:15:17:6a:c9:d8 [ 9.261058] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 9.261145] e1000e 0000:04:00.0 eth1: MAC: 1, PHY: 4, PBA No: D50869-004 [ 9.262991] e1000e 0000:01:00.0 enp1s0: renamed from eth0 [ 9.267440] BTRFS: device label 6TB devid 4 transid 515371 /dev/sdc2 [ 9.269122] e1000e 0000:04:00.0 eno1: renamed from eth1 [ 9.429026] BTRFS: device label 6TB devid 2 transid 515371 /dev/sdd2 [ 9.472477] BTRFS: device label Backup devid 1 transid 77630 /dev/sde1 [ 9.484556] audit: type=1130 audit(1578243553.589:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.490756] audit: type=1130 audit(1578243553.595:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=multipathd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 9.759678] 8021q: adding VLAN 0 to HW filter on device eno1 [ 10.007660] 8021q: adding VLAN 0 to HW filter on device enp1s0 [ 10.008805] Generic Realtek PHY r8169-500:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE) [ 10.069759] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4 [ 10.070156] sd 10:0:0:0: Attached scsi generic sg5 type 0 [ 10.109937] r8169 0000:05:00.0 enp5s0: Link is Down [ 11.538876] sd 10:0:0:0: [sdf] 60978816 512-byte logical blocks: (31.2 GB/29.1 GiB) [ 11.539027] sd 10:0:0:0: [sdf] Write Protect is off [ 11.539030] sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00 [ 11.539166] sd 10:0:0:0: [sdf] No Caching mode page found [ 11.539168] sd 10:0:0:0: [sdf] Assuming drive cache: write through [ 11.562366] sdf: sdf1 sdf2 [ 11.564020] sd 10:0:0:0: [sdf] Attached SCSI removable disk [ 12.095938] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 12.096148] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 12.702468] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.702481] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 22.016213] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 22.016460] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 22.125430] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 22.693688] fbcon: Taking over console [ 22.693763] Console: switching to colour frame buffer device 128x48 [ 22.715019] audit: type=1130 audit(1578243566.820:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.724105] audit: type=1130 audit(1578243566.829:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.733142] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 22.874642] audit: type=1130 audit(1578243566.979:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.878191] audit: type=1130 audit(1578243566.983:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsiuio comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.883616] audit: type=1130 audit(1578243566.988:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.890880] audit: type=1130 audit(1578243566.996:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 22.890887] audit: type=1131 audit(1578243566.996:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.000568] audit: type=1130 audit(1578243567.105:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.008299] audit: type=1131 audit(1578243567.113:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.009835] audit: type=1131 audit(1578243567.114:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.110455] systemd-journald[341]: Received SIGTERM from PID 1 (systemd). [ 23.198766] printk: systemd: 27 output lines suppressed due to ratelimiting [ 24.598232] SELinux: policy capability network_peer_controls=1 [ 24.598233] SELinux: policy capability open_perms=1 [ 24.598233] SELinux: policy capability extended_socket_class=1 [ 24.598233] SELinux: policy capability always_check_network=0 [ 24.598234] SELinux: policy capability cgroup_seclabel=1 [ 24.598234] SELinux: policy capability nnp_nosuid_transition=1 [ 24.617153] systemd[1]: Successfully loaded SELinux policy in 525.479ms. [ 24.670095] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time. [ 24.806913] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 26.084ms. [ 24.817023] systemd[1]: systemd v243-4.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 24.828891] systemd[1]: Detected architecture x86-64. [ 24.835833] systemd[1]: Initializing machine ID from random generator. [ 25.927463] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 25.928006] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. [ 25.928116] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 25.929156] systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly. [ 25.929352] systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly. [ 25.929510] systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly. [ 25.929648] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. [ 26.360375] systemd-journald[979]: Received client request to flush runtime journal. [ 26.723895] acpi_cpufreq: overriding BIOS provided _PSD data [ 26.830463] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190703/utaddress-204) [ 26.830470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 26.899099] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 26.899171] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 26.899385] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 27.560462] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 27.660629] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client [ 27.686831] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input27 [ 27.686916] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input28 [ 27.687047] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input29 [ 27.729904] kvm: Nested Virtualization enabled [ 27.729913] kvm: Nested Paging enabled [ 27.729913] SVM: Virtual VMLOAD VMSAVE supported [ 27.729914] SVM: Virtual GIF supported [ 27.764686] MCE: In-kernel MCE decoding enabled. [ 27.796968] EDAC amd64: Node 0: DRAM ECC disabled. [ 27.796969] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 27.876059] EDAC amd64: Node 0: DRAM ECC disabled. [ 27.876061] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 27.876446] [drm] amdgpu kernel modesetting enabled. [ 27.876591] Parsing CRAT table with 1 nodes [ 27.876596] Creating topology SYSFS entries [ 27.876624] Topology: Add APU node [0x0:0x0] [ 27.876625] Finished initializing topology [ 27.876721] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 27.876724] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff [ 27.876726] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfca00000 -> 0xfca7ffff [ 27.876728] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 27.876730] fb0: switching to amdgpudrmfb from EFI VGA [ 27.876837] Console: switching to colour dummy device 80x25 [ 27.876892] amdgpu 0000:07:00.0: vgaarb: deactivate vga console [ 27.877227] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1002:0x15D8 0xCC). [ 27.877247] [drm] register mmio base: 0xFCA00000 [ 27.877247] [drm] register mmio size: 524288 [ 27.877267] [drm] add ip block number 0 [ 27.877268] [drm] add ip block number 1 [ 27.877269] [drm] add ip block number 2 [ 27.877270] [drm] add ip block number 3 [ 27.877271] [drm] add ip block number 4 [ 27.877272] [drm] add ip block number 5 [ 27.877273] [drm] add ip block number 6 [ 27.877274] [drm] add ip block number 7 [ 27.877275] [drm] add ip block number 8 [ 27.898620] EDAC amd64: Node 0: DRAM ECC disabled. [ 27.898623] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 27.914482] EDAC amd64: Node 0: DRAM ECC disabled. [ 27.914485] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 27.938826] [drm] BIOS signature incorrect 0 0 [ 27.938886] ATOM BIOS: 113-RAVEN2-115 [ 27.949394] [drm] VCN decode is enabled in VM mode [ 27.949396] [drm] VCN encode is enabled in VM mode [ 27.949396] [drm] VCN jpeg decode is enabled in VM mode [ 27.949463] [drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit [ 27.949479] amdgpu 0000:07:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 27.949482] amdgpu 0000:07:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 27.949484] amdgpu 0000:07:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 27.949491] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 27.949492] [drm] RAM width 128bits DDR4 [ 27.949835] [TTM] Zone kernel: Available graphics memory: 3049354 KiB [ 27.949837] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 27.949837] [TTM] Initializing pool allocator [ 27.949843] [TTM] Initializing DMA pool allocator [ 27.950008] [drm] amdgpu: 2048M of VRAM memory ready [ 27.950015] [drm] amdgpu: 3072M of GTT memory ready. [ 27.950043] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 27.950194] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 27.973302] [drm] use_doorbell being set to: [true] [ 27.973349] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu [ 28.002397] [drm] Found VCN firmware Version: 1.86 Family ID: 18 [ 28.002404] [drm] PSP loading VCN firmware [ 28.023298] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR [ 28.082862] [drm] failed to load ucode id (12) [ 28.082863] [drm] psp command failed and response status is (-53233) [ 28.085861] [drm] failed to load ucode id (13) [ 28.085862] [drm] psp command failed and response status is (-65521) [ 28.088863] [drm] failed to load ucode id (14) [ 28.088863] [drm] psp command failed and response status is (-65521) [ 28.110578] [drm] DM_PPLIB: values for F clock [ 28.110580] [drm] DM_PPLIB: 0 in kHz, 3649 in mV [ 28.110581] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 28.110581] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 28.110582] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 28.110583] ------------[ cut here ]------------ [ 28.110759] WARNING: CPU: 1 PID: 999 at drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:1452 dcn_bw_update_from_pplib.cold+0x73/0x9c [amdgpu] [ 28.110760] Modules linked in: amdgpu(+) edac_mce_amd kvm_amd snd_hda_codec_hdmi ccp snd_hda_intel kvm snd_hda_codec amd_iommu_v2 snd_hda_core gpu_sched i2c_algo_bit irqbypass snd_hwdep ttm snd_seq joydev snd_seq_device drm_kms_helper snd_pcm wmi_bmof snd_timer drm snd soundcore sp5100_tco i2c_piix4 k10temp gpio_amdpt gpio_generic acpi_cpufreq ip_tables vfat fat squashfs dm_multipath btrfs xor zstd_compress hid_logitech_hidpp raid6_pq libcrc32c zstd_decompress 8021q garp mrp stp llc crct10dif_pclmul r8169 crc32_pclmul crc32c_intel ghash_clmulni_intel uas usb_storage e1000e wmi video pinctrl_amd hid_logitech_dj sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop fuse [ 28.110803] CPU: 1 PID: 999 Comm: systemd-udevd Not tainted 5.3.7-301.fc31.x86_64 #1 [ 28.110804] Hardware name: Gigabyte Technology Co., Ltd. B450M DS3H/B450M DS3H-CF, BIOS F50 11/27/2019 [ 28.110954] RIP: 0010:dcn_bw_update_from_pplib.cold+0x73/0x9c [amdgpu] [ 28.110958] Code: 48 8b 93 60 03 00 00 db 42 78 83 f9 02 77 37 b8 02 00 00 00 8d 71 ff e9 32 fe f3 ff 48 c7 c7 e8 4f ce c0 31 c0 e8 03 16 52 ca <0f> 0b e9 ac fe f3 ff 48 c7 c7 e8 4f ce c0 31 c0 e8 ee 15 52 ca 0f [ 28.110959] RSP: 0018:ffffa3c7c0957618 EFLAGS: 00010246 [ 28.110961] RAX: 0000000000000024 RBX: ffff93bad2710000 RCX: 0000000000000006 [ 28.110962] RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffff93bad8657900 [ 28.110963] RBP: ffff93bac80f3080 R08: 0000000000000001 R09: 0000000000000466 [ 28.110964] R10: 0000000000018d9c R11: 0000000000000003 R12: ffffa3c7c09576b8 [ 28.110965] R13: 0000000000000001 R14: 000000000000000b R15: ffffa3c7c0957848 [ 28.110967] FS: 00007f5125707940(0000) GS:ffff93bad8640000(0000) knlGS:0000000000000000 [ 28.110968] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.110969] CR2: 00007f835a428830 CR3: 0000000212cce000 CR4: 00000000003406e0 [ 28.110970] Call Trace: [ 28.111129] dcn10_create_resource_pool+0x997/0xa40 [amdgpu] [ 28.111135] ? _cond_resched+0x15/0x30 [ 28.111139] ? kmem_cache_alloc_trace+0x162/0x220 [ 28.111288] ? firmware_parser_create+0x17e/0x5f0 [amdgpu] [ 28.111435] dc_create_resource_pool+0x1b2/0x1d0 [amdgpu] [ 28.111586] ? dal_gpio_service_create+0x95/0xe0 [amdgpu] [ 28.111731] dc_create+0x233/0x660 [amdgpu] [ 28.111735] ? apic_timer_interrupt+0xa/0x20 [ 28.111871] ? amdgpu_cgs_create_device+0x23/0x50 [amdgpu] [ 28.112016] amdgpu_dm_init+0x130/0x1b0 [amdgpu] [ 28.112159] ? phm_wait_for_register_unequal.part.0+0x50/0x80 [amdgpu] [ 28.112303] dm_hw_init+0xe/0x20 [amdgpu] [ 28.112450] amdgpu_device_init.cold+0x1508/0x173e [amdgpu] [ 28.112558] amdgpu_driver_load_kms+0x86/0x1f0 [amdgpu] [ 28.112577] drm_dev_register+0x111/0x150 [drm] [ 28.112684] amdgpu_pci_probe+0xbd/0x120 [amdgpu] [ 28.112689] ? __pm_runtime_resume+0x58/0x80 [ 28.112693] local_pci_probe+0x42/0x80 [ 28.112696] pci_device_probe+0x107/0x1a0 [ 28.112699] really_probe+0xf0/0x380 [ 28.112702] driver_probe_device+0x59/0xd0 [ 28.112705] device_driver_attach+0x53/0x60 [ 28.112707] __driver_attach+0x8a/0x150 [ 28.112709] ? device_driver_attach+0x60/0x60 [ 28.112711] bus_for_each_dev+0x78/0xc0 [ 28.112714] bus_add_driver+0x14a/0x1e0 [ 28.112716] driver_register+0x6c/0xb0 [ 28.112718] ? 0xffffffffc0e66000 [ 28.112722] do_one_initcall+0x46/0x1f4 [ 28.112724] ? _cond_resched+0x15/0x30 [ 28.112726] ? kmem_cache_alloc_trace+0x162/0x220 [ 28.112729] ? do_init_module+0x23/0x230 [ 28.112731] do_init_module+0x5c/0x230 [ 28.112733] load_module+0x27b1/0x2990 [ 28.112737] ? __do_sys_init_module+0x16e/0x1a0 [ 28.112739] ? _cond_resched+0x15/0x30 [ 28.112740] __do_sys_init_module+0x16e/0x1a0 [ 28.112744] do_syscall_64+0x5f/0x1a0 [ 28.112747] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 28.112749] RIP: 0033:0x7f512675909e [ 28.112752] Code: 48 8b 0d ed fd 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ba fd 0b 00 f7 d8 64 89 01 48 [ 28.112753] RSP: 002b:00007ffe0ea8f3f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 28.112755] RAX: ffffffffffffffda RBX: 000055a005fd4cb0 RCX: 00007f512675909e [ 28.112756] RDX: 00007f512637a84d RSI: 00000000008435ce RDI: 000055a00713dc30 [ 28.112757] RBP: 000055a00713dc30 R08: 0000000000000003 R09: 00007ffe0ea8e86e [ 28.112758] R10: 0000000000000004 R11: 0000000000000246 R12: 00007f512637a84d [ 28.112759] R13: 0000000000000001 R14: 000055a005fed070 R15: 000055a005fd4cb0 [ 28.112761] ---[ end trace 1c14aa1ff9c55602 ]--- [ 28.112786] [drm] DM_PPLIB: values for DCF clock [ 28.112787] [drm] DM_PPLIB: 300000 in kHz, 3649 in mV [ 28.112788] [drm] DM_PPLIB: 600000 in kHz, 3974 in mV [ 28.112789] [drm] DM_PPLIB: 626000 in kHz, 4174 in mV [ 28.112790] [drm] DM_PPLIB: 654000 in kHz, 4325 in mV [ 28.119826] [drm] Display Core initialized with v3.2.35! [ 28.144833] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 28.144834] [drm] Driver supports precise vblank timestamp query. [ 28.156668] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 28.157506] kfd kfd: Allocated 3969056 bytes on gart [ 28.157951] kfd kfd: Failed to resume IOMMU for device 1002:15d8 [ 28.158117] kfd kfd: device 1002:15d8 NOT added due to errors [ 28.159193] [drm] fb mappable at 0x61000000 [ 28.159194] [drm] vram apper at 0x60000000 [ 28.159194] [drm] size 8294400 [ 28.159195] [drm] fb depth is 24 [ 28.159195] [drm] pitch is 7680 [ 28.159380] fbcon: amdgpudrmfb (fb0) is primary device [ 28.173655] Console: switching to colour frame buffer device 240x67 [ 28.194202] amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device [ 28.200000] amdgpu 0000:07:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 28.200002] amdgpu 0000:07:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 28.200003] amdgpu 0000:07:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 28.200005] amdgpu 0000:07:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 28.200006] amdgpu 0000:07:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 28.200007] amdgpu 0000:07:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 28.200008] amdgpu 0000:07:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 28.200010] amdgpu 0000:07:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 28.200011] amdgpu 0000:07:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 28.200012] amdgpu 0000:07:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 28.200014] amdgpu 0000:07:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 28.200015] amdgpu 0000:07:00.0: ring vcn_dec uses VM inv eng 1 on hub 1 [ 28.200016] amdgpu 0000:07:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 28.200018] amdgpu 0000:07:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 28.200019] amdgpu 0000:07:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1 [ 28.220693] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:07:00.0 on minor 0 [ 28.231387] kauditd_printk_skb: 44 callbacks suppressed [ 28.231392] audit: type=1130 audit(1578261572.335:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:acpi_video1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.451535] audit: type=1130 audit(1578261572.554:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.749740] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 28.749799] db_root: cannot open: /etc/target [ 28.768071] iscsi: registered transport (iser) [ 28.862339] RPC: Registered rdma transport module. [ 28.862340] RPC: Registered rdma backchannel transport module. [ 28.905224] audit: type=1130 audit(1578261573.009:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=rdma comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.944835] audit: type=1130 audit(1578261573.048:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.944841] audit: type=1131 audit(1578261573.048:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.970471] audit: type=1130 audit(1578261573.074:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.970493] audit: type=1131 audit(1578261573.074:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 28.976583] audit: type=1130 audit(1578261573.080:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 29.040278] audit: type=1130 audit(1578261573.144:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 29.095950] audit: type=1130 audit(1578261573.200:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 30.733864] Adding 4194300k swap on /dev/sda4. Priority:-2 extents:1 across:4194300k SSFS [ 30.760871] Adding 4190204k swap on /dev/sdb1. Priority:-3 extents:1 across:4190204k FS [ 30.772865] Adding 4190204k swap on /dev/sdc1. Priority:-4 extents:1 across:4190204k FS [ 30.789870] Adding 3995644k swap on /dev/sdd1. Priority:-5 extents:1 across:3995644k FS [ 46.332879] EXT4-fs (sdf2): mounting ext3 file system using the ext4 subsystem [ 46.360174] BTRFS info (device sde1): using free space tree [ 46.360177] BTRFS info (device sde1): has skinny extents [ 46.365100] EXT4-fs (sdf2): mounted filesystem with ordered data mode. Opts: (null) [ 46.774173] show_signal_msg: 1 callbacks suppressed [ 46.774176] evolution-calen[1938]: segfault at 7ff50000000a ip 00007ff61e7e73bc sp 00007ff605cfafc0 error 4 in libc-2.30.so[7ff61e784000+14f000] [ 46.774185] Code: 43 28 00 00 00 00 48 8b 54 24 08 48 89 ef 48 89 43 10 48 83 cf 01 48 89 7b 08 48 89 53 18 48 89 2c 2b 48 85 c9 74 87 48 89 cb <48> 8b 43 08 89 c1 c1 e9 04 83 e9 02 49 8d 4c cc 10 49 39 cd 0f 85 [ 54.611614] logitech-hidpp-device 0003:046D:4063.0006: HID++ 4.5 device connected.