[ 0.000000] Linux version 5.3.0-18-generic (buildd@lcy01-amd64-027) (gcc version 9.2.1 20190909 (Ubuntu 9.2.1-8ubuntu1)) #19-Ubuntu SMP Tue Oct 8 20:14:06 UTC 2019 (Ubuntu 5.3.0-18.19-generic 5.3.1) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed quiet splash --- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005b880fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005b881000-0x000000005b9a3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005b9a4000-0x000000005bb30fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005bb31000-0x000000005bf71fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005bf72000-0x000000005cafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005cafe000-0x000000005cb8efff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000005cb8f000-0x000000005effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x5bf25000 ACPI 2.0=0x5bebe000 ACPI=0x5bebe000 SMBIOS=0x5c9e8000 SMBIOS 3.0=0x5c9e7000 MEMATTR=0x5a2b1018 ESRT=0x5a1f0318 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B450M DS3H/B450M DS3H-CF, BIOS F50 11/27/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3493.551 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000904] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000913] MTRR default type: uncachable [ 0.000913] MTRR fixed ranges enabled: [ 0.000914] 00000-9FFFF write-back [ 0.000915] A0000-BFFFF write-through [ 0.000916] C0000-FFFFF write-protect [ 0.000916] MTRR variable ranges enabled: [ 0.000917] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000918] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000919] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000919] 3 disabled [ 0.000920] 4 disabled [ 0.000920] 5 disabled [ 0.000920] 6 disabled [ 0.000921] 7 disabled [ 0.000921] TOM2: 0000000220000000 aka 8704M [ 0.001174] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001238] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001243] last_pfn = 0x5f000 max_arch_pfn = 0x400000000 [ 0.005178] esrt: Reserving ESRT space from 0x000000005a1f0318 to 0x000000005a1f0350. [ 0.005245] check: Scanning 1 areas for low memory corruption [ 0.005253] Using GB pages for direct mapping [ 0.005255] BRK [0x1c601000, 0x1c601fff] PGTABLE [ 0.005256] BRK [0x1c602000, 0x1c602fff] PGTABLE [ 0.005257] BRK [0x1c603000, 0x1c603fff] PGTABLE [ 0.005293] BRK [0x1c604000, 0x1c604fff] PGTABLE [ 0.005294] BRK [0x1c605000, 0x1c605fff] PGTABLE [ 0.005450] BRK [0x1c606000, 0x1c606fff] PGTABLE [ 0.005537] BRK [0x1c607000, 0x1c607fff] PGTABLE [ 0.005730] BRK [0x1c608000, 0x1c608fff] PGTABLE [ 0.005781] BRK [0x1c609000, 0x1c609fff] PGTABLE [ 0.005874] BRK [0x1c60a000, 0x1c60afff] PGTABLE [ 0.005924] RAMDISK: [mem 0x2dd75000-0x32eb1fff] [ 0.005937] ACPI: Early table checksum verification disabled [ 0.005940] ACPI: RSDP 0x000000005BEBE000 000024 (v02 ALASKA) [ 0.005943] ACPI: XSDT 0x000000005BEBE0A8 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005947] ACPI: FACP 0x000000005BEC4E40 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.005951] ACPI: DSDT 0x000000005BEBE218 006C25 (v02 ALASKA A M I 01072009 INTL 20160930) [ 0.005954] ACPI: FACS 0x000000005BF5AE00 000040 [ 0.005955] ACPI: APIC 0x000000005BEC4F58 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.005958] ACPI: FPDT 0x000000005BEC50B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005960] ACPI: FIDT 0x000000005BEC5100 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005962] ACPI: SSDT 0x000000005BEC51A0 000060 (v02 ALASKA A M I 01072009 AMI 01072009) [ 0.005964] ACPI: SSDT 0x000000005BEC5200 005419 (v02 ALASKA A M I 00000002 MSFT 04000000) [ 0.005966] ACPI: SSDT 0x000000005BECA620 003699 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005968] ACPI: MCFG 0x000000005BECDCC0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.005971] ACPI: SSDT 0x000000005BECDD00 006825 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005973] ACPI: HPET 0x000000005BED4528 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.005975] ACPI: UEFI 0x000000005BED4560 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.005977] ACPI: TPM2 0x000000005BED45A8 000038 (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.005979] ACPI: IVRS 0x000000005BED45E0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000) [ 0.005981] ACPI: SSDT 0x000000005BED46B0 0008E0 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.005983] ACPI: CRAT 0x000000005BED4F90 000490 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.005985] ACPI: CDIT 0x000000005BED5420 000029 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.005987] ACPI: SSDT 0x000000005BED5450 0012BE (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005989] ACPI: SSDT 0x000000005BED6710 00146E (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005991] ACPI: SSDT 0x000000005BED7B80 001EC3 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.005994] ACPI: SSDT 0x000000005BED9A48 0000BF (v01 ALASKA A M I 00001000 INTL 20160930) [ 0.005996] ACPI: WSMT 0x000000005BED9B08 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005998] ACPI: SSDT 0x000000005BED9B30 0013F0 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.006005] ACPI: Local APIC address 0xfee00000 [ 0.006129] No NUMA configuration found [ 0.006130] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.006138] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.006312] Zone ranges: [ 0.006312] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006313] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006314] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006314] Device empty [ 0.006315] Movable zone start for each node [ 0.006317] Early memory node ranges [ 0.006318] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.006319] node 0: [mem 0x0000000000100000-0x0000000009e01fff] [ 0.006319] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.006320] node 0: [mem 0x000000000a20b000-0x000000000affffff] [ 0.006320] node 0: [mem 0x000000000b020000-0x000000005b880fff] [ 0.006321] node 0: [mem 0x000000005b9a4000-0x000000005bb30fff] [ 0.006321] node 0: [mem 0x000000005cb8f000-0x000000005effffff] [ 0.006321] node 0: [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006374] Zeroed struct page in unavailable ranges: 9227 pages [ 0.006375] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.006376] On node 0 totalpages: 1560373 [ 0.006377] DMA zone: 64 pages used for memmap [ 0.006378] DMA zone: 34 pages reserved [ 0.006378] DMA zone: 3999 pages, LIFO batch:0 [ 0.006421] DMA32 zone: 5938 pages used for memmap [ 0.006421] DMA32 zone: 379990 pages, LIFO batch:63 [ 0.012847] Normal zone: 18381 pages used for memmap [ 0.012849] Normal zone: 1176384 pages, LIFO batch:63 [ 0.025445] ACPI: PM-Timer IO Port: 0x808 [ 0.025447] ACPI: Local APIC address 0xfee00000 [ 0.025454] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.025475] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.025485] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.025487] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.025488] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.025489] ACPI: IRQ0 used by override. [ 0.025490] ACPI: IRQ9 used by override. [ 0.025492] Using ACPI (MADT) for SMP configuration information [ 0.025493] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.025497] smpboot: Allowing 32 CPUs, 28 hotplug CPUs [ 0.025515] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.025516] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.025518] PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff] [ 0.025519] PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff] [ 0.025520] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] [ 0.025521] PM: Registered nosave memory: [mem 0x5b881000-0x5b9a3fff] [ 0.025522] PM: Registered nosave memory: [mem 0x5bb31000-0x5bf71fff] [ 0.025523] PM: Registered nosave memory: [mem 0x5bf72000-0x5cafdfff] [ 0.025523] PM: Registered nosave memory: [mem 0x5cafe000-0x5cb8efff] [ 0.025524] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff] [ 0.025524] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.025525] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.025525] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.025526] PM: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.025527] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.025530] Booting paravirtualized kernel on bare hardware [ 0.025533] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.025538] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.027002] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.027010] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.027011] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.027014] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.027047] Built 1 zonelists, mobility grouping on. Total pages: 1535956 [ 0.027048] Policy zone: Normal [ 0.027049] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed quiet splash --- [ 0.027923] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.028338] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.028412] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.034279] Calgary: detecting Calgary via BIOS EBDA area [ 0.034281] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.044899] Memory: 5837524K/6241492K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 403968K reserved, 0K cma-reserved) [ 0.045222] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.045242] ftrace: allocating 43189 entries in 169 pages [ 0.057486] rcu: Hierarchical RCU implementation. [ 0.057488] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 0.057488] Tasks RCU enabled. [ 0.057489] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.057489] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.059891] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16 [ 0.060350] random: crng done (trusting CPU's manufacturer) [ 0.060398] Console: colour dummy device 80x25 [ 0.060401] printk: console [tty0] enabled [ 0.060428] ACPI: Core revision 20190703 [ 0.060610] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.060644] APIC: Switch to symmetric I/O mode setup [ 0.383618] Switched APIC routing to physical flat. [ 0.385088] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.404633] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325b84b9c8e, max_idle_ns: 440795256015 ns [ 0.404636] Calibrating delay loop (skipped), value calculated using timer frequency.. 6987.10 BogoMIPS (lpj=13974204) [ 0.404638] pid_max: default: 32768 minimum: 301 [ 0.407356] LSM: Security Framework initializing [ 0.407369] Yama: becoming mindful. [ 0.407497] AppArmor: AppArmor initialized [ 0.407571] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.407587] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.407770] *** VALIDATE proc *** [ 0.407842] *** VALIDATE cgroup1 *** [ 0.407844] *** VALIDATE cgroup2 *** [ 0.407920] LVT offset 1 assigned for vector 0xf9 [ 0.407962] LVT offset 2 assigned for vector 0xf4 [ 0.407975] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.407975] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.407978] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.407979] Spectre V2 : Mitigation: Full AMD retpoline [ 0.407980] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.407981] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.407981] Spectre V2 : User space: Vulnerable [ 0.407982] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.408160] Freeing SMP alternatives memory: 36K [ 0.517978] smpboot: CPU0: AMD Athlon 3000G with Radeon Vega Graphics (family: 0x17, model: 0x18, stepping: 0x1) [ 0.518119] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.518122] ... version: 0 [ 0.518122] ... bit width: 48 [ 0.518122] ... generic registers: 6 [ 0.518123] ... value mask: 0000ffffffffffff [ 0.518123] ... max period: 00007fffffffffff [ 0.518123] ... fixed-purpose events: 0 [ 0.518124] ... event mask: 000000000000003f [ 0.518159] rcu: Hierarchical SRCU implementation. [ 0.518594] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.518857] smp: Bringing up secondary CPUs ... [ 0.518953] x86: Booting SMP configuration: [ 0.518953] .... node #0, CPUs: #1 #2 #3 [ 0.522918] smp: Brought up 1 node, 4 CPUs [ 0.522918] smpboot: Max logical packages: 8 [ 0.522918] smpboot: Total of 4 processors activated (27948.40 BogoMIPS) [ 0.525128] devtmpfs: initialized [ 0.525128] x86/mm: Memory block size: 128MB [ 0.525128] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes) [ 0.525128] PM: Registering ACPI NVS region [mem 0x5bb31000-0x5bf71fff] (4460544 bytes) [ 0.525128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.525128] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.525128] pinctrl core: initialized pinctrl subsystem [ 0.525128] PM: RTC time: 17:06:03, date: 2020-01-05 [ 0.525128] NET: Registered protocol family 16 [ 0.525128] audit: initializing netlink subsys (disabled) [ 0.525128] audit: type=2000 audit(1578243962.148:1): state=initialized audit_enabled=0 res=1 [ 0.525128] EISA bus registered [ 0.525128] cpuidle: using governor ladder [ 0.525128] cpuidle: using governor menu [ 0.525128] ACPI: bus type PCI registered [ 0.525128] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.525128] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.525128] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.525128] PCI: Using configuration type 1 for base access [ 0.525716] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.525716] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.528722] ACPI: Added _OSI(Module Device) [ 0.528722] ACPI: Added _OSI(Processor Device) [ 0.528723] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.528723] ACPI: Added _OSI(Processor Aggregator Device) [ 0.528724] ACPI: Added _OSI(Linux-Dell-Video) [ 0.528725] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.528725] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.543024] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.544446] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.550208] ACPI: Interpreter enabled [ 0.550223] ACPI: (supports S0 S3 S4 S5) [ 0.550224] ACPI: Using IOAPIC for interrupt routing [ 0.550611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551015] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.560032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.560036] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.560219] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.560392] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.560402] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.560752] PCI host bridge to bus 0000:00 [ 0.560754] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.560755] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.560755] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.560756] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.560757] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.560758] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.560759] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.560760] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.560760] pci_bus 0000:00: root bus resource [mem 0x21f340000-0x7fffffffff window] [ 0.560761] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.560771] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.560890] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.561045] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.561146] pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400 [ 0.561199] pci 0000:00:01.1: enabling Extended Tags [ 0.561253] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.561374] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.561427] pci 0000:00:01.2: enabling Extended Tags [ 0.561481] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.561614] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.561724] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.561782] pci 0000:00:08.1: enabling Extended Tags [ 0.561840] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.561956] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.562014] pci 0000:00:08.2: enabling Extended Tags [ 0.562071] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.562221] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.562390] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.562573] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.562618] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.562663] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.562707] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.562752] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.562798] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.562846] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.562892] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.563047] pci 0000:01:00.0: [8086:10b9] type 00 class 0x020000 [ 0.563089] pci 0000:01:00.0: reg 0x10: [mem 0xfcf40000-0xfcf5ffff] [ 0.563105] pci 0000:01:00.0: reg 0x14: [mem 0xfcf20000-0xfcf3ffff] [ 0.563122] pci 0000:01:00.0: reg 0x18: [io 0xf000-0xf01f] [ 0.563186] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf1ffff pref] [ 0.563287] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.563392] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.563403] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.563408] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.563410] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.563483] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.563514] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 0.563566] pci 0000:02:00.0: enabling Extended Tags [ 0.563639] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.563689] pci 0000:02:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0000:00:01.2 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 0.563738] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601 [ 0.563804] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 0.563813] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 0.563821] pci 0000:02:00.1: enabling Extended Tags [ 0.563873] pci 0000:02:00.1: PME# supported from D3hot D3cold [ 0.563941] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400 [ 0.564002] pci 0000:02:00.2: enabling Extended Tags [ 0.564061] pci 0000:02:00.2: PME# supported from D3hot D3cold [ 0.564175] pci 0000:00:01.2: PCI bridge to [bus 02-06] [ 0.564180] pci 0000:00:01.2: bridge window [io 0xc000-0xdfff] [ 0.564182] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff] [ 0.564187] pci 0000:00:01.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.564290] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400 [ 0.564358] pci 0000:03:00.0: enabling Extended Tags [ 0.564431] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.564521] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400 [ 0.564588] pci 0000:03:01.0: enabling Extended Tags [ 0.564662] pci 0000:03:01.0: PME# supported from D3hot D3cold [ 0.564758] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400 [ 0.564825] pci 0000:03:04.0: enabling Extended Tags [ 0.564898] pci 0000:03:04.0: PME# supported from D3hot D3cold [ 0.565008] pci 0000:02:00.2: PCI bridge to [bus 03-06] [ 0.565014] pci 0000:02:00.2: bridge window [io 0xc000-0xdfff] [ 0.565017] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.565023] pci 0000:02:00.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.565104] pci 0000:04:00.0: [8086:10b9] type 00 class 0x020000 [ 0.565161] pci 0000:04:00.0: reg 0x10: [mem 0xfcc40000-0xfcc5ffff] [ 0.565184] pci 0000:04:00.0: reg 0x14: [mem 0xfcc20000-0xfcc3ffff] [ 0.565206] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.565293] pci 0000:04:00.0: reg 0x30: [mem 0xfcc00000-0xfcc1ffff pref] [ 0.565434] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.565560] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.565574] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.565580] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] [ 0.565583] pci 0000:03:00.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.565661] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.565708] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.565750] pci 0000:05:00.0: reg 0x18: [mem 0xfcb00000-0xfcb00fff 64bit] [ 0.565777] pci 0000:05:00.0: reg 0x20: [mem 0x7ffff00000-0x7ffff03fff 64bit pref] [ 0.565942] pci 0000:05:00.0: supports D1 D2 [ 0.565943] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.566129] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.566135] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.566138] pci 0000:03:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.566144] pci 0000:03:01.0: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.566192] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.566343] pci 0000:07:00.0: [1002:15d8] type 00 class 0x030000 [ 0.566387] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.566404] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.566416] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.566428] pci 0000:07:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 0.566447] pci 0000:07:00.0: enabling Extended Tags [ 0.566462] pci 0000:07:00.0: BAR 0: assigned to efifb [ 0.566561] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.566679] pci 0000:07:00.1: [1002:15de] type 00 class 0x040300 [ 0.566708] pci 0000:07:00.1: reg 0x10: [mem 0xfca80000-0xfca83fff] [ 0.566779] pci 0000:07:00.1: enabling Extended Tags [ 0.566850] pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.566921] pci 0000:07:00.2: [1022:15df] type 00 class 0x108000 [ 0.566970] pci 0000:07:00.2: reg 0x18: [mem 0xfc900000-0xfc9fffff] [ 0.567002] pci 0000:07:00.2: reg 0x24: [mem 0xfca84000-0xfca85fff] [ 0.567021] pci 0000:07:00.2: enabling Extended Tags [ 0.567179] pci 0000:07:00.3: [1022:15e5] type 00 class 0x0c0330 [ 0.567214] pci 0000:07:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 0.567274] pci 0000:07:00.3: enabling Extended Tags [ 0.567351] pci 0000:07:00.3: PME# supported from D0 D3hot D3cold [ 0.567482] pci 0000:00:08.1: PCI bridge to [bus 07] [ 0.567487] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.567490] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff] [ 0.567495] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.567578] pci 0000:08:00.0: [1022:7901] type 00 class 0x010601 [ 0.567660] pci 0000:08:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff] [ 0.567680] pci 0000:08:00.0: enabling Extended Tags [ 0.567758] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.567871] pci 0000:00:08.2: PCI bridge to [bus 08] [ 0.567878] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.568500] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568564] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568618] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568688] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568748] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568798] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568847] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.568896] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.572859] SCSI subsystem initialized [ 0.572882] libata version 3.00 loaded. [ 0.572882] pci 0000:07:00.0: vgaarb: setting as boot VGA device [ 0.572882] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.572882] pci 0000:07:00.0: vgaarb: bridge control possible [ 0.572882] vgaarb: loaded [ 0.572882] ACPI: bus type USB registered [ 0.572882] usbcore: registered new interface driver usbfs [ 0.572882] usbcore: registered new interface driver hub [ 0.572882] usbcore: registered new device driver usb [ 0.572882] pps_core: LinuxPPS API ver. 1 registered [ 0.572882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.572882] PTP clock support registered [ 0.572882] EDAC MC: Ver: 3.0.0 [ 0.572882] Registered efivars operations [ 0.584847] PCI: Using ACPI for IRQ routing [ 0.590001] PCI: pci_cache_line_size set to 64 bytes [ 0.590091] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.590092] e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff] [ 0.590093] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.590094] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.590094] e820: reserve RAM buffer [mem 0x5b881000-0x5bffffff] [ 0.590095] e820: reserve RAM buffer [mem 0x5bb31000-0x5bffffff] [ 0.590095] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff] [ 0.590096] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.590184] NetLabel: Initializing [ 0.590185] NetLabel: domain hash size = 128 [ 0.590185] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.590195] NetLabel: unlabeled traffic allowed by default [ 0.590204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.590204] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.593665] clocksource: Switched to clocksource tsc-early [ 0.602157] VFS: Disk quotas dquot_6.6.0 [ 0.602180] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.602213] *** VALIDATE hugetlbfs *** [ 0.602288] AppArmor: AppArmor Filesystem Enabled [ 0.602316] pnp: PnP ACPI init [ 0.602455] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.602459] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.602521] system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved [ 0.602524] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.602688] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.602849] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.602850] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.602851] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.602853] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.603262] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.603263] system 00:04: [io 0x040b] has been reserved [ 0.603264] system 00:04: [io 0x04d6] has been reserved [ 0.603265] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.603266] system 00:04: [io 0x0c14] has been reserved [ 0.603267] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.603268] system 00:04: [io 0x0c52] has been reserved [ 0.603268] system 00:04: [io 0x0c6c] has been reserved [ 0.603269] system 00:04: [io 0x0c6f] has been reserved [ 0.603270] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.603271] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.603272] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.603272] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.603273] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.603274] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.603275] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.603275] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.603276] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.603277] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.603278] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.603279] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.603280] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.603281] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.603282] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.603283] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.603284] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.603287] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.603821] pnp: PnP ACPI: found 5 devices [ 0.604836] thermal_sys: Registered thermal governor 'fair_share' [ 0.604836] thermal_sys: Registered thermal governor 'bang_bang' [ 0.604837] thermal_sys: Registered thermal governor 'step_wise' [ 0.604837] thermal_sys: Registered thermal governor 'user_space' [ 0.604837] thermal_sys: Registered thermal governor 'power_allocator' [ 0.609403] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.609434] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.609437] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.609442] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.609451] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.609453] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] [ 0.609458] pci 0000:03:00.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.609466] pci 0000:03:01.0: PCI bridge to [bus 05] [ 0.609468] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.609473] pci 0000:03:01.0: bridge window [mem 0xfcb00000-0xfcbfffff] [ 0.609476] pci 0000:03:01.0: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609482] pci 0000:03:04.0: PCI bridge to [bus 06] [ 0.609495] pci 0000:02:00.2: PCI bridge to [bus 03-06] [ 0.609497] pci 0000:02:00.2: bridge window [io 0xc000-0xdfff] [ 0.609501] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff] [ 0.609505] pci 0000:02:00.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609511] pci 0000:00:01.2: PCI bridge to [bus 02-06] [ 0.609513] pci 0000:00:01.2: bridge window [io 0xc000-0xdfff] [ 0.609517] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff] [ 0.609521] pci 0000:00:01.2: bridge window [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609527] pci 0000:00:08.1: PCI bridge to [bus 07] [ 0.609533] pci 0000:00:08.1: bridge window [io 0xe000-0xefff] [ 0.609537] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff] [ 0.609541] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.609546] pci 0000:00:08.2: PCI bridge to [bus 08] [ 0.609551] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.609559] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.609560] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.609561] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.609562] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.609563] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.609564] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.609565] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.609565] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.609566] pci_bus 0000:00: resource 12 [mem 0x21f340000-0x7fffffffff window] [ 0.609567] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.609568] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.609569] pci_bus 0000:02: resource 0 [io 0xc000-0xdfff] [ 0.609569] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff] [ 0.609570] pci_bus 0000:02: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609571] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff] [ 0.609572] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff] [ 0.609572] pci_bus 0000:03: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609573] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.609574] pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.609575] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.609575] pci_bus 0000:05: resource 1 [mem 0xfcb00000-0xfcbfffff] [ 0.609576] pci_bus 0000:05: resource 2 [mem 0x7ffff00000-0x7fffffffff 64bit pref] [ 0.609577] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.609578] pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfcafffff] [ 0.609578] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.609579] pci_bus 0000:08: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.609684] NET: Registered protocol family 2 [ 0.609841] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.609890] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.610038] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.610114] TCP: Hash tables configured (established 65536 bind 65536) [ 0.610156] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.610175] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.610316] NET: Registered protocol family 1 [ 0.610320] NET: Registered protocol family 44 [ 0.610515] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.610522] pci 0000:07:00.1: D0 power state depends on 0000:07:00.0 [ 0.621673] pci 0000:07:00.3: quirk_usb_early_handoff+0x0/0x662 took 10878 usecs [ 0.621678] PCI: CLS 64 bytes, default 64 [ 0.621720] Trying to unpack rootfs image as initramfs... [ 0.786522] Freeing initrd memory: 83188K [ 0.786572] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter. [ 0.786667] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.786668] pci 0000:00:00.2: PCI INT A: not connected [ 0.787176] pci 0000:00:01.0: Adding to iommu group 0 [ 0.787203] pci 0000:00:01.1: Adding to iommu group 0 [ 0.787230] pci 0000:00:01.2: Adding to iommu group 0 [ 0.787447] pci 0000:00:08.0: Adding to iommu group 1 [ 0.787473] pci 0000:00:08.1: Adding to iommu group 1 [ 0.787497] pci 0000:00:08.2: Adding to iommu group 1 [ 0.787760] pci 0000:00:14.0: Adding to iommu group 2 [ 0.787782] pci 0000:00:14.3: Adding to iommu group 2 [ 0.787990] pci 0000:00:18.0: Adding to iommu group 3 [ 0.788012] pci 0000:00:18.1: Adding to iommu group 3 [ 0.788033] pci 0000:00:18.2: Adding to iommu group 3 [ 0.788056] pci 0000:00:18.3: Adding to iommu group 3 [ 0.788079] pci 0000:00:18.4: Adding to iommu group 3 [ 0.788099] pci 0000:00:18.5: Adding to iommu group 3 [ 0.788120] pci 0000:00:18.6: Adding to iommu group 3 [ 0.788141] pci 0000:00:18.7: Adding to iommu group 3 [ 0.788166] pci 0000:01:00.0: Adding to iommu group 0 [ 0.788191] pci 0000:02:00.0: Adding to iommu group 0 [ 0.788212] pci 0000:02:00.1: Adding to iommu group 0 [ 0.788235] pci 0000:02:00.2: Adding to iommu group 0 [ 0.788258] pci 0000:03:00.0: Adding to iommu group 0 [ 0.788280] pci 0000:03:01.0: Adding to iommu group 0 [ 0.788302] pci 0000:03:04.0: Adding to iommu group 0 [ 0.788329] pci 0000:04:00.0: Adding to iommu group 0 [ 0.788359] pci 0000:05:00.0: Adding to iommu group 0 [ 0.788428] pci 0000:07:00.0: Adding to iommu group 1 [ 0.788472] pci 0000:07:00.1: Adding to iommu group 1 [ 0.788518] pci 0000:07:00.2: Adding to iommu group 1 [ 0.788562] pci 0000:07:00.3: Adding to iommu group 1 [ 0.788608] pci 0000:08:00.0: Adding to iommu group 1 [ 0.788841] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.788841] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada): [ 0.788842] PPR NX GT IA GA PC GA_vAPIC [ 0.788844] AMD-Vi: Interrupt remapping enabled [ 0.788844] AMD-Vi: Virtual APIC enabled [ 0.788984] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.789822] amd_uncore: AMD NB counters detected [ 0.789835] amd_uncore: AMD LLC counters detected [ 0.789991] check: Scanning for low memory corruption every 60 seconds [ 0.791796] Initialise system trusted keyrings [ 0.791826] Key type blacklist registered [ 0.791859] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.792863] zbud: loaded [ 0.793305] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.793506] fuse: init (API version 7.31) [ 0.793643] Platform Keyring initialized [ 0.799153] Key type asymmetric registered [ 0.799154] Asymmetric key parser 'x509' registered [ 0.799163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.799207] io scheduler mq-deadline registered [ 0.800096] pcieport 0000:00:01.1: PME: Signaling with IRQ 26 [ 0.800242] pcieport 0000:00:01.2: PME: Signaling with IRQ 27 [ 0.800384] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 0.800592] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 0.801266] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.801313] efifb: probing for efifb [ 0.801324] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.801325] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.801325] efifb: scrolling: redraw [ 0.801326] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.801388] Console: switching to colour frame buffer device 128x48 [ 0.802662] fb0: EFI VGA frame buffer device [ 0.802749] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.802757] ACPI: Power Button [PWRB] [ 0.802782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.802795] ACPI: Power Button [PWRF] [ 0.802834] Monitor-Mwait will be used to enter C-1 state [ 1.781061] tsc: Refined TSC clocksource calibration: 3495.447 MHz [ 1.781085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3262842a659, max_idle_ns: 440795339710 ns [ 1.781116] clocksource: Switched to clocksource tsc [ 2.805726] ACPI: Invalid passive threshold [ 2.805979] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.805980] ACPI: Thermal Zone [TZ10] (17 C) [ 2.806205] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.807569] Linux agpgart interface v0.103 [ 2.880247] loop: module loaded [ 2.880438] libphy: Fixed MDIO Bus: probed [ 2.880439] tun: Universal TUN/TAP device driver, 1.6 [ 2.880458] PPP generic driver version 2.4.2 [ 2.880486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.880489] ehci-pci: EHCI PCI platform driver [ 2.880500] ehci-platform: EHCI generic platform driver [ 2.880508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.880509] ohci-pci: OHCI PCI platform driver [ 2.880518] ohci-platform: OHCI generic platform driver [ 2.880525] uhci_hcd: USB Universal Host Controller Interface driver [ 2.880643] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.880649] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 2.935935] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 2.936269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.936270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.936271] usb usb1: Product: xHCI Host Controller [ 2.936272] usb usb1: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 2.936272] usb usb1: SerialNumber: 0000:02:00.0 [ 2.936386] hub 1-0:1.0: USB hub found [ 2.936401] hub 1-0:1.0: 10 ports detected [ 2.936676] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.936680] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 2.936682] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.936723] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.936737] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 2.936737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.936738] usb usb2: Product: xHCI Host Controller [ 2.936739] usb usb2: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 2.936739] usb usb2: SerialNumber: 0000:02:00.0 [ 2.936820] hub 2-0:1.0: USB hub found [ 2.936828] hub 2-0:1.0: 4 ports detected [ 2.936893] usb: port power management may be unreliable [ 2.937019] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 2.937021] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3 [ 2.937279] xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 2.937636] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.937637] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.937637] usb usb3: Product: xHCI Host Controller [ 2.937638] usb usb3: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 2.937639] usb usb3: SerialNumber: 0000:07:00.3 [ 2.937733] hub 3-0:1.0: USB hub found [ 2.937747] hub 3-0:1.0: 6 ports detected [ 2.938497] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 2.938499] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4 [ 2.938501] xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 2.938554] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.938568] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 2.938568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.938569] usb usb4: Product: xHCI Host Controller [ 2.938570] usb usb4: Manufacturer: Linux 5.3.0-18-generic xhci-hcd [ 2.938570] usb usb4: SerialNumber: 0000:07:00.3 [ 2.938661] hub 4-0:1.0: USB hub found [ 2.938673] hub 4-0:1.0: 4 ports detected [ 2.938867] i8042: PNP: No PS/2 controller found. [ 2.938945] mousedev: PS/2 mouse device common for all mice [ 2.939025] rtc_cmos 00:02: RTC can wake from S4 [ 2.939226] rtc_cmos 00:02: registered as rtc0 [ 2.939237] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.939241] i2c /dev entries driver [ 2.939273] device-mapper: uevent: version 1.0.3 [ 2.939323] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 2.939335] platform eisa.0: Probing EISA bus 0 [ 2.939336] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.939337] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.939338] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.939338] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.939339] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.939340] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.939341] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.939341] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.939342] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.939342] platform eisa.0: EISA: Detected 0 cards [ 2.939393] ledtrig-cpu: registered to indicate activity on CPUs [ 2.939396] EFI Variables Facility v0.08 2004-May-17 [ 2.954575] NET: Registered protocol family 10 [ 2.959543] Segment Routing with IPv6 [ 2.959564] NET: Registered protocol family 17 [ 2.959596] Key type dns_resolver registered [ 2.959865] RAS: Correctable Errors collector initialized. [ 2.959893] microcode: CPU0: patch_level=0x08108109 [ 2.959897] microcode: CPU1: patch_level=0x08108109 [ 2.959908] microcode: CPU2: patch_level=0x08108109 [ 2.959911] microcode: CPU3: patch_level=0x08108109 [ 2.959930] microcode: Microcode Update Driver: v2.2. [ 2.959940] sched_clock: Marking stable (2643416276, 316510505)->(2962486518, -2559737) [ 2.960026] registered taskstats version 1 [ 2.960034] Loading compiled-in X.509 certificates [ 2.961347] Loaded X.509 cert 'Build time autogenerated kernel key: 6b758c7247b0b59075414cb284a623a59c497bcd' [ 2.961374] zswap: loaded using pool lzo/zbud [ 2.965976] Key type big_key registered [ 2.965980] Key type trusted registered [ 2.968215] Key type encrypted registered [ 2.968217] AppArmor: AppArmor sha1 policy hashing enabled [ 2.969028] ima: Allocated hash algorithm: sha1 [ 3.080734] No architecture policies found [ 3.080748] evm: Initialising EVM extended attributes: [ 3.080750] evm: security.selinux [ 3.080750] evm: security.SMACK64 [ 3.080751] evm: security.SMACK64EXEC [ 3.080752] evm: security.SMACK64TRANSMUTE [ 3.080752] evm: security.SMACK64MMAP [ 3.080753] evm: security.apparmor [ 3.080753] evm: security.ima [ 3.080754] evm: security.capability [ 3.080755] evm: HMAC attrs: 0x1 [ 3.081740] PM: Magic number: 4:212:137 [ 3.081747] usb usb4-port2: hash matches [ 3.081785] acpi PNP0C02:09: hash matches [ 3.081874] rtc_cmos 00:02: setting system clock to 2020-01-05T17:06:05 UTC (1578243965) [ 3.082080] acpi_cpufreq: overriding BIOS provided _PSD data [ 3.083728] Freeing unused decrypted memory: 2040K [ 3.084141] Freeing unused kernel image memory: 2668K [ 3.084144] Write protecting the kernel read-only data: 22528k [ 3.084660] Freeing unused kernel image memory: 2008K [ 3.084936] Freeing unused kernel image memory: 1416K [ 3.093902] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.093906] Run /init as init process [ 3.151953] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.152354] acpi device:02: registered as cooling_device4 [ 3.152402] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2 [ 3.152537] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 3.152720] acpi device:10: registered as cooling_device5 [ 3.152773] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input3 [ 3.158444] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.163132] ahci 0000:02:00.1: version 3.0 [ 3.163340] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 3.163393] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 3.163396] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 3.163977] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.163977] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.164175] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.166553] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190703/utaddress-204) [ 3.166560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.169781] scsi host0: ahci [ 3.170296] scsi host1: ahci [ 3.170405] scsi host2: ahci [ 3.170943] scsi host3: ahci [ 3.176202] libphy: r8169: probed [ 3.176423] r8169 0000:05:00.0 eth0: RTL8168g/8111g, b4:2e:99:94:6f:05, XID 4c0, IRQ 51 [ 3.176425] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.176875] scsi host4: ahci [ 3.176974] scsi host5: ahci [ 3.177075] scsi host6: ahci [ 3.177153] scsi host7: ahci [ 3.177192] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 48 [ 3.177194] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 48 [ 3.177195] ata3: DUMMY [ 3.177195] ata4: DUMMY [ 3.177197] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 48 [ 3.177199] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 48 [ 3.177200] ata7: DUMMY [ 3.177200] ata8: DUMMY [ 3.179140] cryptd: max_cpu_qlen set to 1000 [ 3.187527] ahci 0000:08:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 3.187530] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 3.188319] scsi host8: ahci [ 3.188625] scsi host9: ahci [ 3.188693] ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 53 [ 3.188696] ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00180 irq 54 [ 3.199193] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 3.203699] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 3.211032] AVX2 version of gcm_enc/dec engaged. [ 3.211033] AES CTR mode by8 optimization enabled [ 3.250973] [drm] amdgpu kernel modesetting enabled. [ 3.253155] Parsing CRAT table with 1 nodes [ 3.253157] Creating topology SYSFS entries [ 3.253175] Topology: Add APU node [0x0:0x0] [ 3.253175] Finished initializing topology [ 3.253241] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 3.253243] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff [ 3.253244] amdgpu 0000:07:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfca00000 -> 0xfca7ffff [ 3.253246] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 3.253246] fb0: switching to amdgpudrmfb from EFI VGA [ 3.253427] Console: switching to colour dummy device 80x25 [ 3.253458] amdgpu 0000:07:00.0: vgaarb: deactivate vga console [ 3.253645] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1002:0x15D8 0xCC). [ 3.253657] [drm] register mmio base: 0xFCA00000 [ 3.253658] [drm] register mmio size: 524288 [ 3.253676] [drm] add ip block number 0 [ 3.253677] [drm] add ip block number 1 [ 3.253678] [drm] add ip block number 2 [ 3.253678] [drm] add ip block number 3 [ 3.253679] [drm] add ip block number 4 [ 3.253680] [drm] add ip block number 5 [ 3.253681] [drm] add ip block number 6 [ 3.253681] [drm] add ip block number 7 [ 3.253682] [drm] add ip block number 8 [ 3.268652] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 3.277097] [drm] BIOS signature incorrect 0 0 [ 3.277123] ATOM BIOS: 113-RAVEN2-115 [ 3.277153] [drm] VCN decode is enabled in VM mode [ 3.277154] [drm] VCN encode is enabled in VM mode [ 3.277154] [drm] VCN jpeg decode is enabled in VM mode [ 3.277187] [drm] vm size is 262144 GB, 3 levels, block size is 9-bit, fragment size is 9-bit [ 3.277201] amdgpu 0000:07:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 3.277202] amdgpu 0000:07:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 3.277203] amdgpu 0000:07:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 3.277206] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 3.277207] [drm] RAM width 128bits DDR4 [ 3.277251] [TTM] Zone kernel: Available graphics memory: 3049404 KiB [ 3.277251] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.277252] [TTM] Initializing pool allocator [ 3.277255] [TTM] Initializing DMA pool allocator [ 3.277310] [drm] amdgpu: 2048M of VRAM memory ready [ 3.277312] [drm] amdgpu: 3072M of GTT memory ready. [ 3.277320] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.277455] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [ 3.278619] [drm] use_doorbell being set to: [true] [ 3.278645] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu [ 3.278730] [drm] Found VCN firmware Version: 1.86 Family ID: 18 [ 3.278736] [drm] PSP loading VCN firmware [ 3.296752] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 3.299783] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR [ 3.317702] usb 4-2: New USB device found, idVendor=0bc2, idProduct=2312, bcdDevice= 6.36 [ 3.317704] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.317705] usb 4-2: Product: Expansion [ 3.317706] usb 4-2: Manufacturer: Seagate [ 3.317707] usb 4-2: SerialNumber: NA498QPB [ 3.320904] usbcore: registered new interface driver usb-storage [ 3.322846] scsi host10: uas [ 3.322932] usbcore: registered new interface driver uas [ 3.323991] scsi 10:0:0:0: Direct-Access Seagate Expansion 0636 PQ: 0 ANSI: 6 [ 3.325359] sd 10:0:0:0: Attached scsi generic sg0 type 0 [ 3.326196] sd 10:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.326570] sd 10:0:0:0: [sda] Write Protect is off [ 3.326571] sd 10:0:0:0: [sda] Mode Sense: 2b 00 10 08 [ 3.327425] sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.328971] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:14:9e:b5 [ 3.328973] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.329055] e1000e 0000:01:00.0 eth0: MAC: 1, PHY: 4, PBA No: D50869-003 [ 3.329272] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.452170] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=61.70 [ 3.452172] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.452173] usb 1-2: Product: USB2.1 Hub [ 3.452174] usb 1-2: Manufacturer: GenesysLogic [ 3.452659] [drm] failed to load ucode id (12) [ 3.452661] [drm] psp command failed and response status is (-53233) [ 3.459186] hub 1-2:1.0: USB hub found [ 3.463153] hub 1-2:1.0: 4 ports detected [ 3.464647] [drm] failed to load ucode id (13) [ 3.464648] [drm] psp command failed and response status is (-65521) [ 3.476656] [drm] failed to load ucode id (14) [ 3.476656] [drm] psp command failed and response status is (-65521) [ 3.493087] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:15:17:6a:c9:d8 [ 3.493088] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.493170] e1000e 0000:04:00.0 eth1: MAC: 1, PHY: 4, PBA No: D50869-004 [ 3.497606] e1000e 0000:01:00.0 enp1s0: renamed from eth0 [ 3.502943] ata10: SATA link down (SStatus 0 SControl 300) [ 3.502976] ata9: SATA link down (SStatus 0 SControl 300) [ 3.512974] e1000e 0000:04:00.0 eno1: renamed from eth1 [ 3.523807] [drm] DM_PPLIB: values for F clock [ 3.523809] [drm] DM_PPLIB: 0 in kHz, 3649 in mV [ 3.523809] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 3.523809] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 3.523810] [drm] DM_PPLIB: 0 in kHz, 0 in mV [ 3.523811] ------------[ cut here ]------------ [ 3.523922] WARNING: CPU: 1 PID: 235 at drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:1452 dcn_bw_update_from_pplib.cold+0x7f/0xa8 [amdgpu] [ 3.523923] Modules linked in: uas usb_storage crct10dif_pclmul crc32_pclmul ghash_clmulni_intel amdgpu(+) aesni_intel aes_x86_64 amd_iommu_v2 gpu_sched i2c_algo_bit ttm crypto_simd drm_kms_helper syscopyarea cryptd sysfillrect glue_helper sysimgblt fb_sys_fops drm i2c_piix4 e1000e ahci r8169 realtek libahci wmi video gpio_amdpt gpio_generic [ 3.523935] CPU: 1 PID: 235 Comm: systemd-udevd Not tainted 5.3.0-18-generic #19-Ubuntu [ 3.523936] Hardware name: Gigabyte Technology Co., Ltd. B450M DS3H/B450M DS3H-CF, BIOS F50 11/27/2019 [ 3.524027] RIP: 0010:dcn_bw_update_from_pplib.cold+0x7f/0xa8 [amdgpu] [ 3.524029] Code: 48 8b 93 60 03 00 00 db 42 78 83 f9 02 77 37 b8 02 00 00 00 8d 71 ff e9 fb bf f3 ff 48 c7 c7 80 04 8f c0 31 c0 e8 4c 69 4d eb <0f> 0b e9 96 c0 f3 ff 48 c7 c7 80 04 8f c0 31 c0 e8 37 69 4d eb 0f [ 3.524030] RSP: 0018:ffffa909405ef598 EFLAGS: 00010246 [ 3.524032] RAX: 0000000000000024 RBX: ffff982684420000 RCX: 0000000000000377 [ 3.524033] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000247 [ 3.524033] RBP: ffffa909405ef6e8 R08: 0000000000000377 R09: 0000000000000004 [ 3.524034] R10: 0000000000000000 R11: 0000000000000001 R12: ffffa909405ef638 [ 3.524035] R13: ffff982695836680 R14: 0000000000000001 R15: ffff98268736b800 [ 3.524036] FS: 00007febc9b67880(0000) GS:ffff982698640000(0000) knlGS:0000000000000000 [ 3.524037] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.524037] CR2: 00005560e102c480 CR3: 0000000206840000 CR4: 00000000003406e0 [ 3.524038] Call Trace: [ 3.524133] construct+0x994/0xa50 [amdgpu] [ 3.524137] ? _cond_resched+0x19/0x30 [ 3.524139] ? kmem_cache_alloc_trace+0x19c/0x230 [ 3.524228] dcn10_create_resource_pool+0x41/0x60 [amdgpu] [ 3.524313] dc_create_resource_pool+0x1b0/0x1d0 [amdgpu] [ 3.524402] ? dal_gpio_service_create+0x9f/0xe0 [amdgpu] [ 3.524487] construct+0x21a/0x590 [amdgpu] [ 3.524490] ? kmalloc_order_trace+0x24/0xa0 [ 3.524573] dc_create+0x3b/0x100 [amdgpu] [ 3.524661] amdgpu_dm_init+0x129/0x1a0 [amdgpu] [ 3.524747] dm_hw_init+0x13/0x30 [amdgpu] [ 3.524836] amdgpu_device_ip_init+0x345/0x3df [amdgpu] [ 3.524923] amdgpu_device_init.cold+0x7e0/0xbb4 [amdgpu] [ 3.524986] amdgpu_driver_load_kms+0x8d/0x200 [amdgpu] [ 3.524998] drm_dev_register+0x12f/0x170 [drm] [ 3.525060] amdgpu_pci_probe+0xc6/0x130 [amdgpu] [ 3.525063] ? __pm_runtime_resume+0x60/0x80 [ 3.525065] local_pci_probe+0x48/0x80 [ 3.525067] pci_device_probe+0x10f/0x1b0 [ 3.525069] really_probe+0xfb/0x3a0 [ 3.525071] driver_probe_device+0x5f/0xe0 [ 3.525073] device_driver_attach+0x5d/0x70 [ 3.525075] __driver_attach+0x8f/0x150 [ 3.525076] ? device_driver_attach+0x70/0x70 [ 3.525078] bus_for_each_dev+0x7e/0xc0 [ 3.525079] driver_attach+0x1e/0x20 [ 3.525081] bus_add_driver+0x14f/0x1f0 [ 3.525083] driver_register+0x74/0xc0 [ 3.525084] __pci_register_driver+0x57/0x60 [ 3.525151] amdgpu_init+0x83/0x8d [amdgpu] [ 3.525152] ? 0xffffffffc09e4000 [ 3.525155] do_one_initcall+0x4a/0x1fa [ 3.525157] ? kfree+0x1ef/0x210 [ 3.525158] ? _cond_resched+0x19/0x30 [ 3.525159] ? kmem_cache_alloc_trace+0x19c/0x230 [ 3.525162] do_init_module+0x62/0x250 [ 3.525164] load_module+0x10d4/0x1220 [ 3.525167] __do_sys_finit_module+0xbe/0x120 [ 3.525168] ? __do_sys_finit_module+0xbe/0x120 [ 3.525171] __x64_sys_finit_module+0x1a/0x20 [ 3.525173] do_syscall_64+0x5a/0x130 [ 3.525175] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3.525176] RIP: 0033:0x7febca0da94d [ 3.525178] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 13 e5 0c 00 f7 d8 64 89 01 48 [ 3.525179] RSP: 002b:00007fff1ff4e548 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 3.525180] RAX: ffffffffffffffda RBX: 00005560e1018ca0 RCX: 00007febca0da94d [ 3.525181] RDX: 0000000000000000 RSI: 00007febc9fb7cad RDI: 0000000000000014 [ 3.525181] RBP: 00007febc9fb7cad R08: 0000000000000000 R09: 00005560e1018ca0 [ 3.525182] R10: 0000000000000014 R11: 0000000000000246 R12: 0000000000000000 [ 3.525182] R13: 00005560e1030db0 R14: 0000000000020000 R15: 00005560e1018ca0 [ 3.525184] ---[ end trace 0bfe73e9d6caad78 ]--- [ 3.525193] [drm] DM_PPLIB: values for DCF clock [ 3.525194] [drm] DM_PPLIB: 300000 in kHz, 3649 in mV [ 3.525195] [drm] DM_PPLIB: 600000 in kHz, 3974 in mV [ 3.525195] [drm] DM_PPLIB: 626000 in kHz, 4174 in mV [ 3.525196] [drm] DM_PPLIB: 654000 in kHz, 4325 in mV [ 3.528413] [drm] Display Core initialized with v3.2.35! [ 3.553585] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.553586] [drm] Driver supports precise vblank timestamp query. [ 3.565421] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 3.566642] kfd kfd: Allocated 3969056 bytes on gart [ 3.567234] kfd kfd: Failed to resume IOMMU for device 1002:15d8 [ 3.567403] kfd kfd: device 1002:15d8 NOT added due to errors [ 3.568578] [drm] fb mappable at 0x61000000 [ 3.568578] [drm] vram apper at 0x60000000 [ 3.568579] [drm] size 8294400 [ 3.568579] [drm] fb depth is 24 [ 3.568580] [drm] pitch is 7680 [ 3.568631] fbcon: amdgpudrmfb (fb0) is primary device [ 3.591266] Console: switching to colour frame buffer device 240x67 [ 3.609553] sda: sda1 [ 3.609629] amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device [ 3.612242] sd 10:0:0:0: [sda] Attached SCSI disk [ 3.628776] amdgpu 0000:07:00.0: ring gfx uses VM inv eng 0 on hub 0 [ 3.628778] amdgpu 0000:07:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 3.628779] amdgpu 0000:07:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 3.628780] amdgpu 0000:07:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 3.628781] amdgpu 0000:07:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 3.628782] amdgpu 0000:07:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 3.628783] amdgpu 0000:07:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 3.628784] amdgpu 0000:07:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 3.628785] amdgpu 0000:07:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 3.628786] amdgpu 0000:07:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 3.628787] amdgpu 0000:07:00.0: ring sdma0 uses VM inv eng 0 on hub 1 [ 3.628788] amdgpu 0000:07:00.0: ring vcn_dec uses VM inv eng 1 on hub 1 [ 3.628789] amdgpu 0000:07:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 3.628790] amdgpu 0000:07:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 3.628791] amdgpu 0000:07:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1 [ 3.642525] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:07:00.0 on minor 0 [ 3.660661] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.661178] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 [ 3.661179] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.661478] ata1.00: configured for UDMA/133 [ 3.661615] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 [ 3.661796] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 3.661911] sd 0:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 3.661925] sd 0:0:0:0: [sdb] Write Protect is off [ 3.661927] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.661952] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.662755] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.663372] sd 0:0:0:0: [sdb] Attached SCSI disk [ 3.840930] usb 1-2.1: new high-speed USB device number 3 using xhci_hcd [ 3.992925] usb 1-2.1: New USB device found, idVendor=0781, idProduct=557d, bcdDevice= 1.26 [ 3.992929] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.992931] usb 1-2.1: Product: Cruzer Force [ 3.992933] usb 1-2.1: Manufacturer: SanDisk [ 3.992935] usb 1-2.1: SerialNumber: 4C532000030929120225 [ 4.002971] usb-storage 1-2.1:1.0: USB Mass Storage device detected [ 4.003123] scsi host11: usb-storage 1-2.1:1.0 [ 4.120902] usb 1-2.2: new low-speed USB device number 4 using xhci_hcd [ 4.132904] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.133664] ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 4.133668] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.134513] ata2.00: configured for UDMA/133 [ 4.134683] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 4.134894] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 4.134925] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 4.134942] sd 1:0:0:0: [sdc] Write Protect is off [ 4.134943] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.134982] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.182982] sdc: sdc1 sdc2 [ 4.183466] sd 1:0:0:0: [sdc] Attached SCSI disk [ 4.404703] usb 1-2.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 4.404707] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.404709] usb 1-2.2: Product: Dell KB216 Wired Keyboard [ 4.422104] hidraw: raw HID events driver (C) Jiri Kosina [ 4.485180] usbcore: registered new interface driver usbhid [ 4.485182] usbhid: USB HID core driver [ 4.487213] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:413C:2113.0001/input/input4 [ 4.545068] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-2.2/input0 [ 4.545282] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:413C:2113.0002/input/input5 [ 4.604910] usb 1-2.4: new full-speed USB device number 5 using xhci_hcd [ 4.605134] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:413C:2113.0002/input/input6 [ 4.605268] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-2.2/input1 [ 4.608667] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.609260] ata5.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133 [ 4.609261] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.609799] ata5.00: configured for UDMA/133 [ 4.609937] scsi 4:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 4.610079] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 4.610152] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 4.610153] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 4.610165] sd 4:0:0:0: [sdd] Write Protect is off [ 4.610167] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.610186] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.678770] sdd: sdd1 sdd2 [ 4.679553] sd 4:0:0:0: [sdd] Attached SCSI disk [ 4.971482] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 [ 4.971485] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.971488] usb 1-2.4: Product: USB Receiver [ 4.971490] usb 1-2.4: Manufacturer: Logitech [ 5.010221] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C52B.0003/input/input7 [ 5.020573] scsi 11:0:0:0: Direct-Access SanDisk 1.26 PQ: 0 ANSI: 6 [ 5.020883] sd 11:0:0:0: Attached scsi generic sg4 type 0 [ 5.021874] sd 11:0:0:0: [sde] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 5.024421] sd 11:0:0:0: [sde] Write Protect is off [ 5.024423] sd 11:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 5.026414] sd 11:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.037397] sde: sde1 [ 5.041409] sd 11:0:0:0: [sde] Attached SCSI disk [ 5.068752] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input0 [ 5.084671] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.085831] ata6.00: ATA-8: WDC WD3000F9YZ-09N20L0, 01.01A01, max UDMA/133 [ 5.085833] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.086284] ata6.00: configured for UDMA/133 [ 5.086447] scsi 5:0:0:0: Direct-Access ATA WDC WD3000F9YZ-0 1A01 PQ: 0 ANSI: 5 [ 5.086663] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 5.086665] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 5.086674] sd 5:0:0:0: [sdf] Write Protect is off [ 5.086676] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.086686] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 5.086694] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.092697] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input8 [ 5.092836] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input9 [ 5.135976] sdf: sdf1 sdf2 [ 5.136469] sd 5:0:0:0: [sdf] Attached SCSI disk [ 5.152741] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input10 [ 5.152837] hid-generic 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input1 [ 5.174528] hid-generic 0003:046D:C52B.0005: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input2 [ 5.349518] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-2.4/input2 [ 5.476945] input: Logitech Unifying Device. Wireless PID:4063 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input12 [ 5.477018] input: Logitech Unifying Device. Wireless PID:4063 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input13 [ 5.477146] input: Logitech Unifying Device. Wireless PID:4063 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input14 [ 5.477203] input: Logitech Unifying Device. Wireless PID:4063 System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input15 [ 5.477261] hid-generic 0003:046D:4063.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4063] on usb-0000:02:00.0-2.4/input2:1 [ 5.496180] input: Logitech K370s/K375s as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4061.0007/input/input19 [ 5.528781] logitech-hidpp-device 0003:046D:4061.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K370s/K375s] on usb-0000:02:00.0-2.4/input2:2 [ 5.667110] input: Logitech MX Anywhere 2 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4063.0006/input/input20 [ 5.667211] logitech-hidpp-device 0003:046D:4063.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Anywhere 2] on usb-0000:02:00.0-2.4/input2:1 [ 5.948657] raid6: avx2x4 gen() 22405 MB/s [ 5.996652] raid6: avx2x4 xor() 13126 MB/s [ 6.044654] raid6: avx2x2 gen() 22038 MB/s [ 6.092654] raid6: avx2x2 xor() 14496 MB/s [ 6.140654] raid6: avx2x1 gen() 17077 MB/s [ 6.188658] raid6: avx2x1 xor() 13369 MB/s [ 6.236653] raid6: sse2x4 gen() 15983 MB/s [ 6.284655] raid6: sse2x4 xor() 9672 MB/s [ 6.332653] raid6: sse2x2 gen() 15648 MB/s [ 6.380659] raid6: sse2x2 xor() 10109 MB/s [ 6.428655] raid6: sse2x1 gen() 7654 MB/s [ 6.476656] raid6: sse2x1 xor() 7344 MB/s [ 6.476657] raid6: using algorithm avx2x4 gen() 22405 MB/s [ 6.476657] raid6: .... xor() 13126 MB/s, rmw enabled [ 6.476657] raid6: using avx2x2 recovery algorithm [ 6.480144] xor: automatically using best checksumming function avx [ 6.494995] Btrfs loaded, crc32c=crc32c-intel [ 6.495485] BTRFS: device label Backup devid 1 transid 77633 /dev/sda1 [ 6.495963] BTRFS info (device sda1): using free space tree [ 6.495964] BTRFS info (device sda1): has skinny extents [ 13.066130] BTRFS: device label btrfs-boot devid 1 transid 715 /dev/sdb2 [ 13.066347] BTRFS info (device sdb2): using free space tree [ 13.066349] BTRFS info (device sdb2): has skinny extents [ 13.069209] BTRFS info (device sdb2): enabling ssd optimizations [ 13.128822] BTRFS: device fsid 446d32cb-a6da-45f0-9246-1483ad3420e0 devid 1 transid 3842260 /dev/sdb3 [ 13.129039] BTRFS info (device sdb3): using free space tree [ 13.129040] BTRFS info (device sdb3): has skinny extents [ 13.169361] BTRFS info (device sdb3): enabling ssd optimizations [ 13.265469] BTRFS: device label 6TB devid 3 transid 515371 /dev/sdc2 [ 13.265879] BTRFS info (device sdc2): using free space tree [ 13.265881] BTRFS info (device sdc2): has skinny extents [ 13.266303] BTRFS error (device sdc2): devid 4 uuid 8327c1e2-86a4-4718-b088-ebd196685552 is missing [ 13.266307] BTRFS error (device sdc2): failed to read the system array: -2 [ 13.312646] BTRFS error (device sdc2): open_ctree failed [ 13.423212] BTRFS: device label 6TB devid 4 transid 515371 /dev/sdd2 [ 13.430407] BTRFS info (device sdc2): using free space tree [ 13.430408] BTRFS info (device sdc2): has skinny extents [ 13.430864] BTRFS error (device sdc2): devid 2 uuid c1a5c47f-ffbc-4f72-9eeb-8c17fc9f0e55 is missing [ 13.430869] BTRFS error (device sdc2): failed to read the system array: -2 [ 13.484651] BTRFS error (device sdc2): open_ctree failed [ 16.112650] Adding 4194300k swap on /dev/sdb4. Priority:-2 extents:1 across:4194300k SSFS [ 16.128660] Adding 4190204k swap on /dev/sdc1. Priority:-3 extents:1 across:4190204k FS [ 16.172646] Adding 4190204k swap on /dev/sdd1. Priority:-4 extents:1 across:4190204k FS [ 16.196673] Adding 3995644k swap on /dev/sdf1. Priority:-5 extents:1 across:3995644k FS [ 19.860463] systemd[1]: Inserted module 'autofs4' [ 19.911168] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 19.928677] systemd[1]: Detected architecture x86-64. [ 19.931628] systemd[1]: Set hostname to . [ 19.931845] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 20.064916] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 20.096522] systemd[1]: cdrom.mount: Unit is bound to inactive unit dev-sde1.device. Stopping, too. [ 20.098259] systemd[1]: Listening on Journal Socket (/dev/log). [ 20.098311] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 20.098321] systemd[1]: Reached target Remote File Systems. [ 20.098560] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 20.101165] systemd[1388]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 20.287265] lp: driver loaded but no devices found [ 20.294485] ppdev: user-space parallel port driver [ 20.488127] systemd-journald[1395]: Received request to flush runtime journal from PID 1 [ 20.883590] kvm: Nested Virtualization enabled [ 20.883608] kvm: Nested Paging enabled [ 20.883609] SVM: Virtual VMLOAD VMSAVE supported [ 20.883609] SVM: Virtual GIF supported [ 20.901309] MCE: In-kernel MCE decoding enabled. [ 20.909252] EDAC amd64: Node 0: DRAM ECC disabled. [ 20.909253] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 20.984918] EDAC amd64: Node 0: DRAM ECC disabled. [ 20.984919] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 21.041081] EDAC amd64: Node 0: DRAM ECC disabled. [ 21.041083] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 21.047984] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client [ 21.097353] EDAC amd64: Node 0: DRAM ECC disabled. [ 21.097355] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 21.099364] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input21 [ 21.099479] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input22 [ 21.099539] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input23 [ 21.657547] BTRFS: device label 6TB devid 2 transid 515371 /dev/sdf2 [ 21.738135] spl: loading out-of-tree module taints kernel. [ 21.742022] znvpair: module license 'CDDL' taints kernel. [ 21.742023] Disabling lock debugging due to kernel taint [ 22.676925] ZFS: Loaded module v0.8.1-1ubuntu12, ZFS pool version 5000, ZFS filesystem version 5 [ 25.554556] Generic Realtek PHY r8169-500:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE) [ 25.681768] r8169 0000:05:00.0 enp5s0: Link is Down [ 25.786020] audit: type=1400 audit(1578243988.199:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2382 comm="apparmor_parser" [ 25.786176] audit: type=1400 audit(1578243988.199:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2382 comm="apparmor_parser" [ 28.357344] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 28.357356] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 29.302843] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 29.303081] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 29.557706] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 29.557924] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 31.789210] BTRFS info (device sda1): using free space tree [ 31.789211] BTRFS info (device sda1): has skinny extents [ 31.925803] rfkill: input handler disabled [ 37.977049] logitech-hidpp-device 0003:046D:4063.0006: HID++ 4.5 device connected. [ 69.605137] audit: type=1400 audit(1578244032.019:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/7917/usr/lib/snapd/snap-confine" pid=3876 comm="apparmor_parser" [ 69.605347] audit: type=1400 audit(1578244032.019:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/7917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=3876 comm="apparmor_parser" [ 69.619298] audit: type=1400 audit(1578244032.031:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=3896 comm="apparmor_parser" [ 69.670369] audit: type=1400 audit(1578244032.083:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=3897 comm="apparmor_parser" [ 108.307453] audit: type=1400 audit(1578244070.719:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/7917/usr/lib/snapd/snap-confine" pid=4055 comm="apparmor_parser" [ 108.324696] audit: type=1400 audit(1578244070.739:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/7917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4055 comm="apparmor_parser" [ 108.346690] audit: type=1400 audit(1578244070.759:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.core" pid=4057 comm="apparmor_parser" [ 108.350710] audit: type=1400 audit(1578244070.763:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4059 comm="apparmor_parser"